Onkyo DV-L55 instruction manual Connecting Your TV, Using S-Video, Using Scart European model only

DV-L55_En.book Page 19 Friday, May 28, 2004 12:02 PM

Connecting the DV-L55—Continued

Connecting Your TV

•Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combina- tion, or video selector, the playback picture may be distorted as DVD videos are copy protected.

Note:

•To set up the player for use with a progressive scan TV, see “Video Output settings – Component Out” on page 41.

Using S-Video

If your TV (or other equipment) has an S-Video input, you can use this instead of the standard (composite) out- put for a better quality picture.

•Use the S-Video cable (not supplied with European model) to connect the S VIDEO OUTPUT to an S- Video input on your TV (or monitor or AV receiver).

Line up the small triangle above the jack with the same mark on the plug before plugging in.

Using SCART (European model only)

If your TV has a SCART-type AV input, you can use a SCART cable to connect this player to your TV. This type of connection carries both the sound and the picture, so there’s no need to connect up the AUDIO OUTPUT L/R and VIDEO OUTPUT jacks.

•Use the SCART cable (supplied with European model) to connect the AV CONNECTOR to an AV input on your TV.

COMPONENT

Y PBL

AUDIO OUTPUT

	DIGITAL	COMPONENT
	Y	PB	L
OPTICAL	COAXIAL		REMOTE
			CONTROL

AUDIO
OUTPUT	AV CONNECTOR
ANALOG

S VIDEO	VIDEO	R
		PR

VIDEO OUTPUT

S VIDEO

VIDEO PR

DEO OUTPUT

	REMOTE		AC INLET
	CONTROL
AUDIO
OUTPUT		AV CONNECTOR
ANALOG

R

AV CONNECTOR

TV

S VIDEO IN

Using Component Video

You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment).

This should give you the best quality picture from the three types of video output available.

•Use a component video cable (not supplied) to con- nect the COMPONENT VIDEO OUTPUT jacks to a component video input on your TV, monitor or AV receiver.

AUDIO

			COMPONENT
		Y	PB	L
	COMPONENT				REMOTE
Y	OPTICAL	PB
				AUDIO	CONTROL
				OUTPUT	AV CONNECTOR
				ANALOG
		S VIDEO	VIDEO	R
				PR

VIDEO OUTPUT

VIDEO PR

VIDEO OUTPUT

TV

SCART

This connector can output composite video, S-Video, or RGB video. The default setting is composite, which should work with all TVs. Consult the manual that came with your TV to see if you can use one of the higher qual- ity settings. See page 41 for how to change the video out- put.

COMPONENT

VIDEO IN

Y PB PR

TV

19