Onkyo DV-L55 Initial Settings menu, Digital Audio Out settings, Video Output settings

DV-L55_En.book Page 41 Friday, May 28, 2004 12:02 PM

Initial Settings menu—Continued

Digital Audio Out settings

Setting	Option	What it means
Digital Out	On	Digital audio is output from the digital outputs.
	Off	No digital audio output.
	Dolby Digital	Dolby Digital encoded digital audio is output when playing a
		Dolby Digital DVD disc.
Dolby Digital Out
	Dolby Digital > PCM	Dolby Digital audio is converted to PCM audio before being
		output.
		DTS encoded digital audio is output when playing a DTS disc.
DTS Out	DTS	(Noise will be output if your amplifier/receiver is not compati-
		ble with DTS audio.)
	Off	No digital audio is output when playing a DTS disc.
96 kHz PCM Out	96kHz > 48kHz	96kHz digital audio is converted to 48kHz for digital output.
	96kHz	96kHz digital audio is output as is at 96kHz.
	MPEG	MPEG encoded digital audio is output as is.
MPEG Out
	MPEG > PCM	MPEG encoded digital audio is converted to PCM audio for
		digital output.

Video Output settings

Setting	Option	What it means
	4:3 (Letter Box)	Set if you have a conventional 4:3 TV. Widescreen movies are
		shown with black bars top and bottom.
TV Screen
(See also “Screen sizes		Set if you have a conventional 4:3 TV. Widescreen movies are
and disc formats” on	4:3 (Pan & Scan)	shown with the sides cropped so that the image fills the
page 45.)		screen.
	16:9 (Wide)	Set if you have a widescreen TV.
		Set if your TV is compatible with progressive scan video (see
		your TV’s instruction manual for details). See also “Switching
		the video output to interlace from progressive” on page 18.
		Note that progressive scan video is only output from the com-
		ponent video jacks and that there is no output from the com-
Component Out	Progressive	posite and S-video jacks when this setting is selected.
		If you select progressive scanning while using a TV that
		does not support it.
		Switch the player to standby then, using the front panel con-
		trols, press STANDBY/ON while pressing	to switch the
		player back to Interlace.
	Interlace	Set if your TV is not compatible with progressive scan video.
	Video	Ordinary (composite) video output, compatible with all TVs.
AV Connector Out	S-Video	Almost the same quality as RGB, but can give better results if
		you’re using a long SCART cable.
(European model only)
	RGB	If your TV is compatible, this setting gives the best picture
		quality.

41