Onkyo Connecting the Power/Turning on the DV-L55, Plug the supplied power cord into

DV-L55_En.book Page 22 Friday, May 28, 2004 12:02 PM

Connecting the Power/Turning on the DV-L55

Before connecting

•Make sure that all the connections on pages 16 – 21 are complete (the connection to a TV is required).

STANDBY/ON

STANDBY / ON

DISPLAY

ON	ON STANDBY
	OPEN/
	CLOSE

PLAY

MODE

1 2 3

DISPLAY

4 5 6

DIMMER

7 8 9

0CLEAR

TOP MENU MENU

ENTER

RETURNSETUP

1	Plug the supplied power cord into
	the AC INLET and then into the
	power outlet on the wall.
	• Do not use a power cord other than the
	one supplied with the DV-L55. The
	power cord supplied is designed for
	use with the DV-L55 and should not be
	used with any other device.
	• Never have the power cord discon-
	nected from the DV-L55 while the
	other end is plugged into the wall out-
	let. Doing so may cause an electric
	shock. Always connect by plugging
	into the wall outlet last and disconnect
	by unplugging from the wall outlet
	first.

To a wall outlet

AUDIO ANGLE SUBTITLE ZOOM

RC-574DV

2

STANDBY / ON

Remote

controller

ON

Press STANDBY/ON on the DV-L55 or ON on the remote controller.

The DVD Player turns on and the STANDBY indicator turns off.

•To put the DV-L55 in the standby mode, press STANDBY/ON on the DV-L55, or STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DV-L55 in the standby mode for the next use to avoid sudden loud sound reproduction.

•Setting the STANDBY/ON button to standby does not shut off the power completely.

Screen saver and Auto power off

This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for 30 minutes, the player automatically goes into standby.

22