Onkyo CP704 View Mode, Hdmi Output Setting, Progressive Setting, HD Resolution, HD Jpeg mode

Page 44

Configuring the DV-CP704—Continued

View Mode

With this setting you can adjust the aspect of the picture so that it fits your TV screen. Due to your TV’s aspect ratio setting and the DVD’s aspect ratio, black bars may appear above and below the picture or at the sides and the aspect of the picture may be unsuitable. In this case, use this setting to adjust the aspect of the picture as you like.

Normal (default): The picture is displayed in its original aspect ratio.

View Mode 1: The picture is stretched horizontally to make it fit the height of the screen.

View Mode 2: The picture is stretched vertically to make it fit the width of the screen.

View Mode 3: The picture is stretched horizontally and vertically to make it fit the screen.

Tip:

The view mode can also be changed by using the remote controller’s [ASPECT] button.

Note:

• This setting does not apply to DVD menus.

HDMI Output Setting

With this setting you can turn the HDMI video output on or off. See page 39 for more information.

On (default): Video is output by the HDMI OUT.

Off: Video is not output by the HDMI OUT.

Note:

•When this setting is set to On, video is output by the analog video outputs only when the HD Resolution is set to 480p/576p.

Progressive Setting

With this setting you can set the component video output to progressive or interlaced. While the HDMI Output Set- ting is set to On, this setting is fixed at Progressive and cannot be changed. See page 39 for more information.

Interlaced: Component video output is interlaced.

Progressive: Component video output is progressive.

Note:

•This setting can also be changed by pressing and hold- ing the Previous [ ] button, and then pressing [STANDBY/ON] button.

HD Resolution

With this setting you can set the video resolution for the

HDMI OUT.

Auto: The resolution is automatically set to the native resolution of the TV connected to the HDMI OUT.

480p (480p/576p) (default): The setting displayed depends on the country in which you purchased the DV-CP704.

720 x 480p 60 Hz or 720 x 576p 50 Hz

720p: 1280 x 720p 50/60 Hz

1080i: 1920 x 1080i 50/60 Hz

Tip:

When the HDMI Output Setting is set to On, you can also change this setting by using the remote controller’s [RESOLUTION] button (see page 39).

Notes:

•Initially, the DV-CP704 is configured to output both HDMI and analog video. However, if after changing the resolution settings there’s no picture, with the ana- log video connection or HDMI connection in place, press the [RESOLUTION] button repeatedly to restore the picture.

•If Auto selected but the DV-CP704 doesn’t support the TV’s native resolution, the resolution will be 480p/ 576p.

•When the resolution is set to 720p or 1080i, no video is output by the analog video outputs.

HD JPEG mode

If your TV is connected to the HDMI OUT and the HDMI resolution is set to 720p or 1080i, this setting allows you to display your JPEG pictures in high defini- tion.

On: JPEG pictures displayed in high definition.

Off: JPEG pictures displayed as normal.

Notes:

•If your TV is connected to a video output other than the HDMI OUT, or the HD Resolution set to some- thing other than 720p or 1080i, even if this setting is set to On, your JPEG pictures will not be displayed in high definition.

•When using HD JPEG, it may take a while to display each picture. And the Zoom function cannot be used. Also, onscreen status messages such as “Play” and “Stop” are not displayed.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Connections Basic PlaybackImportant Safety Instructions AvisInstalling this Unit PrecautionsPower Precautions For models having a power cord with a polarized plugLabel on the right is applied on the rear panel FCC Information for UserContents Introduction Supplied AccessoriesDV-CP704 Features Introduction Disc NotesAbout WMA Disc Content OrganizationMP3/WMA/JPEG Compatibility Cleaning Discs Handling DiscsStoring Discs CopyrightDV-CP704-related Terminology Jpeg Joint Photographic Experts GroupCompressed file format used to store digital pho- tos Compressed digital video format used for Video CDsControls & Connectors Front PanelControls & Connectors DisplayPower cord Rear PanelRemote Controller Resolution button Setup buttonChain Mode button ASPECT/ZOOM button 41Using the Remote Controller Before Using the DV-CP704Installing the Remote Controller’s Batteries Connecting the DV-CP704 AV Cables & ConnectorsBefore Making Any Connections Optical Digital JackConnecting the DV-CP704 Connecting Your TV or ProjectorCompatibility of this unit with progressive-scan TVs Video cableConnecting an AV receiver Connecting a Stereo AmpAnalog Connection Digital ConnectionConnecting a Component with an Hdmi Input What is HDMI?Using Hdmi AV receiverConnecting -compatible Components Hdmi & the DV-CP704Video Audio FormatsFirst Time Setup Powering Up & Setting Up the DV-CP704Powering Up the DV-CP704 Basic Playback Loading & Removing DiscsSelecting Discs Basic PlaybackLoading Discs During Playback Starting, Pausing & Stopping Playback Start To start playback, press the Play ButtonPause To pause playback, press Pause button Stop To stop playback, press the Stop ButtonNavigating Disc Menus Load and select a DVD-VideoDisc See page 23Using the Disc Navigation Window Load and select an audio CD orMP3, WMA, or Jpeg disc For audio CDsSelectingTitles, Chapters &Tracks by Number Press the Stop Button to stopPlayback Load and select a discLocating Specific Points in Time Frame-by-Frame Playback Fast Forward & ReversePress the Pause button to Pause playback, and then pressAdjusting the Display Brightness Slow-motion PlaybackUsing Jpeg CDs Using Chain Mode Using Party ModePress the Party Mode button Chain Mode indicator flashes on the displayAdvanced Playback Repeat PlaybackAdvanced Playback Random PlaybackMemory Playback Inserting New Items in the ListEditing Steps Selecting Camera AnglesDeleting Items from the List Selecting Languages & Audio Formats Selecting SubtitlesTo turn Hdmi on or off Setting the HdmiPress the Resolution button Using Last Memory Button once or twiceTo resume playback, select Disc and press the Play butDisplaying Information ZoomingConfiguring the DV-CP704 Using the Onscreen Setup Menus Configuring the DV-CP704Picture Menu TV ShapeView Mode Hdmi Output SettingProgressive Setting HD ResolutionAudio Menu Language Menu Display MenuChange the Security Code Operating Setting MenuParental Lock Initial Setup Menu Language Code ListTV Shape-see Hdmi Output Setting-see On-Screen Language-see Selecting Other LanguagesTroubleshooting Troubleshooting Abnormal Behavior Restoring the Default SettingsHdmi Status Mode Specifications
Top Page Image Contents