Onkyo BD-SP807 instruction manual Network Connection with LAN, Connecting the AC Cord

CONNECTIONS

Network Connection with LAN

•You can use a disc which offers BD-Live function by connecting the unit to the Internet. (For BD-Live information, please refer to page 29)

Hub or broadband router	Telecommunications
	equipment (modem, etc.)

LANWAN

1 2 3 4 5

this unit LAN cable

LAN

LAN cable Internet

Make sure to connect the telecommunications equipment (modem, etc.) to the ETHERNET terminal via Hub or broadband router.

No supplied cables are used in this connection:

Please purchase the necessary cables at your local store.

Note

•After connecting to the Internet, set up necessary network settings.

•Do not insert any cable other than a LAN cable to the ETHERNET terminal to avoid damaging the unit.

•If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.

•If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.

•For a broadband router, use a router which supports 10BASE-T/100BASE-TX.

•Do not connect your PC directly to the ETHERNET terminal of this unit.

•For the network setup, refer to “Network Connection” on pages 45-48.

•For more information about cables or connections, see the manual accompanying modem, broadband router and hub you use.

Connecting the AC Cord

After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC outlet.

Insert the plugs securely. Incomplete connections will result in the generation of noise.

AC outlet

AC 120V, 60 Hz

AC cord

this unit

Supplied cables used in this connection are as follows:

• AC cord x 1

18 EN