Connections, Setting UP the Player

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS

Installation and Setup

CONNECTIONS

SETTING UP THE PLAYER

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc.

DVD PLAYER CONNECTIONS

Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.

Rear of TV

					SCART INPUT
	COMPONENT VIDEO /		AUDIO INPUT		VIDEO
PROGRESSIVE SCAN INPUT					INPUT
Pr	Pb	Y	R	L

CA VT

Rear of DVD player

Video and Audio Connections to Your TV

Make sure the DVD player is connected directly to the TV and not to a VCR, otherwise the DVD image could be distorted by the copy protection system.

Video

Connect the VIDEO OUT jack on the DVD player to the video in jack on the TV using the video cable (V).

SCART connection

Connect the TO TV SCART jack on the DVD Player to the corresponding in jacks on the TV using the SCART cable (T).

Component Video (Color Stream®)

Connect the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on the DVD Player to the corresponding in jacks on the TV using an Y Pb Pr cable (C).

PROGRESSIVE SCAN (COLORSTREAM® PRO):

•If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player.

NOTES

•Set the Progressive to “On” on the setup menu for progressive signal, see page 14.

•Set the progressive to “Off” by removing any disc from the unit and close the disc tray. see that “no disc” is displayed on the display window. Then press STOP and hold it for five seconds before releasing it.

•Progressive scan does not work with the analogue video connections (yellow VIDEO OUT jack).

ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

	CAUTION	Audio Connection to Your TV:
	You must set the TV Output Select option to use COMPONENT VIDEO	Audio Connection to Your TV:
		Connect the left and right AUDIO OUT jacks of the DVD Player to the
	OUT/PROGRESSIVE SCAN and SCART jacks.
	OUT/PROGRESSIVE SCAN and SCART jacks.	audio left and right IN jacks on the TV (A) using the audio cables. Do
	(See “TV Output Select” on page 14.)	not connect the DVD Player’s AUDIO OUT jack to the Phono In jack
		(record deck) of your audio system.