ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
Operation
SPEAKER SETUP
This chapter includes important reference information to help you set your DVD player.
SPEAKER SETUP
Make the following settings for the
1Press SETUP. The setup menu appears.
AUDIO
Speaker | Front L |
|
|
|
|
Size |
|
|
|
|
|
Large |
|
|
|
| |
Volume |
| dB |
|
| |
0 |
|
| |||
Distance |
| m(ft) |
|
| |
0.6(2) |
|
| |||
Test |
|
|
|
|
|
Off |
|
|
|
| |
|
|
|
|
|
|
| Select | Move | Return | Enter | |
|
|
|
|
|
|
2Use 
to select the AUDIO option then press 4 to move to the second level.
3Use 
to select the Speaker Setup option then press 
to move to the third level. “Select” is highlighted.
4Press ENTER and the 5.1 Speaker Setup menu appears.
5Use 
to select the desired speaker.
6Adjust options using 
buttons.
7Press ENTER to confirm your selection. Returns to the previous menu.
SPEAKER SELECTION
Select a speaker that you want to adjust. (Front speakers (Left), Centre Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer).
SIZE
Press 
to set a mode. (Large, Small or None)
If you have connected the system to a speaker with a low frequency of 100 Hz or below, select “Large.”
If you have connected the system to a speaker without a low frequency of 100 Hz or below, select
“Small.” If you have not connected a subwoofer, always select “Large” for Front speakers (L/R).
When you do not have a certain speaker connected, select “None.”
Front L/R speaker’s size can be set to “Large” or “Small.”
If Front L/R speaker’s size is set to “Small,” Rear and Centre speaker’s size can be set to “Small” or “None.”
Subwoofer’s size can be set only to “Large” or “None”.
VOLUME
Press 
to adjust the output level of the selected speaker.
DISTANCE
If you connected speakers to your DVD Player, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time.
Press 
to adjust the Distance of the selected speaker. [0.3(1)m(ft) - 6.0(20)m(ft)]
TEST
Press 
to test the signals of each speaker. Adjust the volume to
match the volume of test signals memorized in the system. Front Left (L) → Center → Front Right (R)
→Rear Left (R) → Rear Right (L) → SubWoofer
You can adjust the volume during operating the test tone, first use 
buttons to select Volume or Speaker option, then use the 
buttons to select volume or speaker, so that the volume of all speakers is the same from the listener’s position.
If you adjust the volume while operating the test tone, the test tone will be held paused in the current speaker channel.
28