NAD T524 owner manual Troubleshooting, Symptom Cause Correction

Reference

TROUBLESHOOTING

Check the following guide for the possible cause of a problem before contacting service.

SYMPTOM	CAUSE	CORRECTION
No power.	• The power cord is disconnected.	• Plug the power cord securely into the mains
		socket.
The power is on, but the DVD player does not	• No disc is inserted.	• Insert a disc. (Check that the DVD or, audio CD
		indicator in the display window is lit.)
work.
No picture.	• The TV is not set to receive DVD signal output.	• Select the appropriate video input mode on the
		TV.
	• The video cable is not connected securely.	• Connect the video cable securely.
No sound.	• The equipment connected with the audio cable	• Select the correct input mode of the audio
	is not set to receive DVD signal output.	receiver so you can listen to the sound from the
		DVD player.
	• The power of the equipment connected with the	• Turn on the equipment connected with the
	audio cable is turned off.	audio cable.
	• The AUDIO options are set to the wrong	• Set the Digital Audio Output to the correct
	position.	position, then turn on the DVD player again by
		pressing POWER.
The DVD player does not start playback.	• An unplayable disc is inserted.	• Insert a playable disc. (Check the disc type, color
		system, and regional code.)
	• The rating level is set.	• Cancel the rating function or change the rating
		level.
The remote control does not work properly.	• The remote control is not pointed at the remote	• Point the remote control at the remote sensor of
	sensor on the DVD player.	the DVD player.
	• The remote control is too far from the DVD	• Operate the remote control closer to the DVD
	player.	player.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

29