ENGLISH FRANÇAIS DEUTSCH
Setup
CONNECTING TO A SURROUND SOUND SYSTEM
DOLBY DIGITAL SOUND
One can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic and 2 Channel Digital Stereo.
ABOUT DOLBY DIGITAL SOUND
Dolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD videodiscs by connecting the T562 to a 5.1 channel A/V receiver equipped with a Dolby Digital decoder
NEDERLANDS ESPAÑOL ITALIANO
To enjoy Dolby Digital sound from this DVD player you need the following:
•DVD recorded in Dolby Digital surround format.
•
•5 speakers and 1 sub woofer
From DIGITAL OUT jack (COAXIAL or OPTICAL)
75 ohm coaxial cable or optical cable
To digital input jack of surround receiver equipped with Dolby Digital decoder (coaxial or digital).
Front speaker (left)
Rear speaker (left surround)
From S-VIDEO / Component Video /
Composite or SCART
To
Centre speaker
Rear Speaker (right surround)
Connection example
Front speaker (right)
Subwoofer
PORTUGUÊS SVENSKA
TO ENJOY DOLBY DIGITAL SOUND
You need to select from the OSD drop down menu, Audio, Analogue Off, and Auto, 96K or 48K. If uncertain, select Auto from the Analogue Off menu. Do not set the Digital Audio Output of this DVD player to Analogue Off unless you are connecting the DIGITAL OUT jack of the DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Initial Setup Settings, Audio).
NOTE
Refer to the owner’s manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate may be 96 or 48K. When you connect the T562 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. The output sound of the T562 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect or disconnect the T562’s power cord. If you leave the receiver power on, the speakers may be damaged.
18