NAD T562 owner manual Rear Panel North American Version

Page 5

Identification of Controls

REAR PANEL (NORTH AMERICAN VERSION)

1

DIGITAL OUT COAX Jack

6

COMPONENT VIDEO OUT Jacks

2

DIGITAL OUT OPTICAL (With Dust Protection Cap) Jack

7

+12V TRIGGER IN Jack

3

MIXED AUDIO OUT (L & R) Jacks

8

AUTO TRIGGER ON-OFF Switch

4

S-VIDEO OUT Jack

9

EXT. IR IN Jack

5

VIDEO OUT Jack

10 Power cord socket

NOTE

Remove the dust protection cap from the connector and connect the optical digital cable (not supplied) firmly so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust.

NOTE

The 12V TRIGGER IN jack is a 3.5mm monotype miniature phone jack with the centre pin the 12V signal-sense. We recommend that you use a good quality cable with shield when attaching the 3.5mm monotype plug so as to prevent false triggering of the amplifier due to electro-magnetic interference from nearby electronic equipment. The 12V-IN TRIGGER allows you to have an external 12V signal to turn ON the NAD T562 from standby. This 12V signal must be a continuous 12V signal in order to keep the T562 in the ON state. Once you remove the 12V signal the T562 will return to standby. Check the specifications of the trigger input terminal on the other components to ensure these are compatible with the T562. All 12V-TRIGGER inputs and outputs on other NAD components with a 12V-TRIGGER feature are fully compatible with the NAD T562’s 12V-TRIGGER IN. Before making any connections to any 12V-TRIGGER IN make sure all components are disconnected from the AC mains. If in doubt over the connections, installation and/or operation of the 12V-TRIGGER IN connection, consult your NAD dealer or sales representative. Failure to observe the above may result in damage to the NAD T562 and/or any ancillary components attached to it.

NOTE

The EXT. IR IN jack is connected to the output of an IR (infrared) repeater (Xantech or similar), or the IR output of another component to allow control of the T562 from a remote location. Ask your dealer or custom installer for further details

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents English T562Introduction Safety PrecautionsThis Product to Rain or Moisture Record Your Model Number NOW, While YOU can see ITTable of Contents Identification of Controls Power button and on/standby/off indicatorFront Panel Display WindowRear Panel North American Version Rear Panel European Version Operation of the T562 with the Remote Control Preparing the Remote ControlRemote Control Operation of the T562 with the Remote Control Operation of the T562 OperationPlace a disc on the disc tray with the playback side down After OperationSpecial Playback Playing in SLOW-MOTION DVD only Scanning AT High SpeedDISPLAY/TITLES/MENUS/SUBTITLES Operation Using Menu IconsOSD Operation Repeat Play Viewing from Another AngleFor Your Reference DVDPress Zoom during normal playback or pause Zoom FeatureStoring Markers in Memory Program Play CD Random Play CDTo resume normal playback, press Random Clearing the ProgramPlayback with MP3 Playback Audio with CD, VCD, and DVDVCD To Play AN MP3 File RepeatedlyConnecting to a Surround Sound System SetupEnglish Français Deutsch Nederlands Español ItalianoDeutsch Français English Dolby PRO Logic Surround SoundItaliano Español Nederlands With a Receiver Equipped with a Dolby Digital DecoderEnglish Français Channel Digital Stereo SoundDeutsch Nederlands Español Italiano Português Svenska To Enjoy Digital SoundFrançais DTS SoundTo Enjoy DTS Sound Svenska Português Italiano Español Nederlands DeutschTo Enjoy Good Quality Sound Connecting to AN Analogue Stereo SystemSvenska Português Italiano Español Connecting to a TV DirectlyNederlands Deutsch Français English Selecting Languages Initial Setup SettingsSelecting Scan Type Selecting Video Display ModeSelecting Gamma Settings Selecting Signal ModeOptions Selecting AudioReference On Cleaning DiscsOn Handling Discs On Storing DiscsRegion Management Information Disc Mark Contents Disc sizePlayable Discs Code Language Table of Languages and Their AbbreviationsSymptom Cause Correction TroubleshootingSymptoms and Correction PAL / Ntsc SpecificationsDolby Laboratories Notice Copyright InformationMacrovision Product Notice Reference T562 Manual 06/02
Top Page Image Contents