Setup
INITIAL SETUP SETTINGS
SELECTING VIDEO DISPLAY MODE
To select the appropriate screen type according to your TV set, one selects the SETUP menu form the remote. Chose ‘Video’, ‘Display Mode’, then the three choices that best fit your TV set.
1From the
2Use the navigation keys to select the desired ‘Display Mode’ and press ENTER on the remote
‘Widescreen 16:9’: Select when a
‘Letterbox 4:3’: The video material not formatted in the Pan & Scan style is played back in the letterbox style (black bands appear at top and bottom of screen).
‘Pan Scan 4:3’: Select when a conventional TV set is connected. The video material formatted in the Pan & Scan style is played back in that style (the left and right edges are cut off).
Cut Off
16:9 Wide | 4:3 Letterbox | 4:3 Panscan |
NOTES
•Each screen shows an example when the video material for a widescreen is played. (This setting does not affect the video material for conventional size.)
•Progressive scan is available in NTSC with Component output only. Progressive scan is not available for
SELECTING SCAN TYPE
To select the appropriate screen type according to your TV set, one selects the ‘Setup’ menu form the remote. Chose ‘Video’, ‘Scan Type’, then the two choices that are available.
1From the
2Using the navigation keys, toggle between the two scan modes ‘Interlaced’ or ‘Progressive Scan’ and press ENTER on the remote
There are two modes for scanning depending on your TV set, one is Progressive scan, the other interlaced scan. Select the scan type that best suites your TV set.
NOTE
Progressive scan is available in NTSC with Component output only. Progressive scan is not available for
SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH
25