NAD L 73 owner manual Input Selector

Page 14

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Setup

SETTING UP THE L73

INPUT SELECTOR

•From the OSD’s <AUDIO SETUP MENU> screen, select the <INPUT SETTINGS> menu item using the

HTR L73 remotes’ and “Enter” keys.

• Using the keys select the video input (DVD, SAT, VCR, and VIDEO 4) you wish to configure.

•Use the keys to move to the <AUDIO IN> line, and then use the keys to select the analog audio input you wish to be linked to that input (usually, this will be the same, i.e., “VCR” with “VCR,” “Video 4” with “Video 4,” and so on).

NOTE

It is not necessary to have an analog audio input connected for every video input you employ. In fact, in some cases-for example for a CAB/SAT-it may be preferable to make only a coaxial or optical digital audio link to the L73 for audio playback. This avoids possible confusion, and ensures that the L73’s high-performance surround and digital audio circuitry will always be employed.

•Now use the keys to move to the <DIGITAL INPUT> line and select the digital input you wish linked to that input.

•If you set <DIGITAL INPUT> to “ANALOG,” no incoming digital signal will be selected by that input. (Set an input’s <DIGITAL INPUT> to “ANALOG” only if you wish to ensure that that input will not play an incoming digital bit stream, even if one is present.)

NOTE

• That signals from digital inputs are not available on the analog VCR OUT jacks.

14

Image 14

Contents DVD Receiver FCC Warning Safety PrecautionsDo not Stare Into Beam FCC Notice Industry Canada RequirementSafety Information Important Information for UK CustomersRecord Your Model Number NOW, While YOU can see IT Table of Contents Getting the Most from the NAD L73 Upgradability About the HTR L73 System Remote ControlEase of USE QuickstartIdentification of controls Front PanelIdentification of controls Rear Panel Español Italiano PortuguêsImportant Note Dealing with HUM and Noise Setting UP the L73Getting Started About the ON-SCREEN Displays OSD and FRONT-PANEL ReadoutDisplaying the L73 RECEIVER’S OSD Setting L73 OSD Language Receiver Section onlyInput Setup Navigating the OSD and Making ChangesInput Selector Surround Mode Speaker ConfigurationSetting Speaker Configuration Channel LevelsSetting Speaker Delay Time Setting Level TrimDelay Time Selecting Sources Using the L73Adjusting the Volume Muting the SoundAbout DVD/SVCD/VCD/CD Using the L73’S DVD/VCD/CDPress OPEN/CLOSE the Disc Tray Opens Region Management InformationOSD Navigation Video Setup Video Setup MenuTitle and Menu Buttons OSD LanguageFormat Signal ModeDisc Video OSD Scan TypePlaying CD, VCD, SVCD, DVD Programming CD VCD Svcd Parental Control PasswordRating Level Random Play CD VCD SvcdRandom Play Slide Show Mode JpegPlaying MP3 WMA and Jpeg CD-R/CD-RW RepeatUsing the L73’S AM/FM Radio Viewing RDS Text Choosing the FM Mute / ModeAbout RDS Enhanced Stereo About the L73’S Surround ModesEars StereoDolby Virtual Speaker and Headphone Dolby Digital / DTSSelecting Surround Modes Dolby Digital Delay Time Adjusting Surround ModesDTS Delay Time Enhanced Stereo / Ears Delay TimeAdjusting the Tone Controls Adjusting Level Trim on the FLYTo Adjust Level Trim About the 12 V Trigger OUTControlling the L73 Using the HTR L73 Remote ControlSpecifications PUNCH-THROUGH Cancel OperationLearning Codes from Other Remotes Recording Macros Copy a Command from Another KEYMacro Commands Delete Mode KEY-ILLUMINATION TimeoutFactory Reset Executing MacrosSearch Mode Loading CODE-LIBRARIESChecking CODE-LIBRARY Number Summary of HTR L73 ModesTroubleshooting DVD Section SpecificationsPhysical Specifications Amplifier SectionReference L73 Manual 01/05 Korea