Setting Speaker Configuration, Surround Mode

Setup

SPEAKER CONFIGURATION

Every surround-sound system requires “bass-management” to direct low-frequency content from any or all channels to the speakers best able to reproduce it. For this function to operate correctly, it is important that you correctly identify your speakers’ capabilities.

We use the terms “SMALL”, “LARGE”, “NONE”, (and OFF), but note that physical size may be irrelevant.

•A “SMALL” speaker is any model, regardless of physical size, that lacks significant deep-bass response, that is, below about 80 Hz.

•A “LARGE” speaker is any full-range model, that is, one with deep-bass response

•A “NONE” speaker is one that is not present in your system. For example, you might not have any surround-back speakers installed; in that case, you would set the <SURROUND> setup item to “NONE.”

•An “OFF” speaker is one that may be present such as a subwoofer but set to off in the <SPEAKER SETTINGS> setup menu such as <SUBWOOFER: OFF>.

SETTING SPEAKER CONFIGURATION

From the OSD’s <AUDIO SETUP MENU> screen, select the <SPEAKER SETTINGS> line using the HTR L73

remote’s , and “ENTER” keys. Using the keys, set <FRONT:> to “LARGE” or “SMALL” as your main-front speakers require according to the guidelines noted above. Similarly, set <CENTER>, and <SURROUND> to “LARGE,” “SMALL,” or “NONE” as your system’s loudspeakers require. Set <SUBWOOFER> to “ON” or “OFF.”

NOTE

•The SPEAKER CONFIGURATION is “global”; that is, it remains in force with all inputs and in all SURROUND MODEs.

•You can set Subwoofer to “ON” even with “LARGE” front speakers. In such cases, both subwoofer and front speaker will receive the LFE-channel signal. In the case where the front speakers are set to “SMALL” the LFE-channel signal will be routed to subwoofer but not to the front speakers; LFE- channel signal will pass only to the subwoofer. In most subwoofer-equipped systems, setting front speakers to “SMALL” is usually the better option.

SURROUND MODE

From the OSD’s <AUDIO SETUP MENU> screen, select the <LISTENING MODE> line using the HTR L73

remote’s , and “Enter” keys. Using the and keys you can select mode variations, and adjust various parameters, depending on the current SURROUND MODE. For more information, see “About the L73’s SURROUND MODEs,” below.

CHANNEL LEVELS

Adjusting the relative balance of your system’s loudspeakers ensures that surround-sound recordings, whether music or film, will present the balance of effects, music, and dialog that the artists intended. Additionally, if your system incorporates a subwoofer it establishes a correct relationship between the volume of the subwoofer and the other speakers, and thus of low-frequencies (bass) to other sonic elements.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH