PROGRAMMING THE REMOTE CONTROL
You can program the
PREPROGRAMMING METHOD
USING A THREE-DIGIT CODE NUMBER:
1Turn on the component you plan to operate manually.
2Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds.
3Using the joystick, move the cursor down in the LCD screen to 3. PREPROGRAM.
4Push the joystick down to enter the preprogramming mode.
5Select the device on the LCD screen that you wish to program, (e.g. To program DVD, press the DVD device button).
6Select the device from which the three digit code number table will be selected, (e.g. If
it is from the DVD code table, press the DVD device button). | ENG |
7Point the remote control toward the component and enter the
11