PROGRAMMING THE REMOTE CONTROL
10Continue to program other components by repeating from Step 5.
11Once you have completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously.
12You will be in the setting mode. Move the cursor to 8. TO EXIT and press the joystick down or simply press the MAIN button to exit to the main menu.
LEARNING METHOD
You can also teach any of the buttons in the remote control except the MAIN and PAGE buttons with the following steps:
1Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds.
2Move the cursor to 4. LEARNING with the joystick and then push the joystick down to enter the learning mode.
3If you wish to teach any of the functional buttons in the device, keep the cursor to COMMON BUTTON and select the device that you wish to enter. If you wish to teach the twelve device buttons shown on the LCD, press the MUTE button to move the cursor to the DEVICE BUTTON and select the device on the LCD that you wish to teach.
ENG
14