PROGRAMMING THE REMOTE CONTROL
TO ERASE THE LEARNED BUTTONS
TO ERASE A SINGLE BUTTON:
1Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds.
2Move the cursor to 4. Learning with the joystick and then push the joystick down to enter the learning mode.
3Move the cursor to COMMON BUTTON and select the device that contains the functional button you wish to erase. If you wish to erase the function in the device button, move the cursor to DEVICE BUTTON.
4Press the functional button or device button you wish to erase for three seconds or more and it will flash “ERASED”. Repeat this step for other buttons you wish to erase.
5Once you completed erasing and wish to exit from this mode, press the MAIN button
ENG | to go back to the main page of the learning mode. Exit from the Main page by pressing |
| both the MAIN and PAGE buttons simultaneously. |
6You will now be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the joystick or simply press the MAIN button to exit to the main menu.
TO ERASE ALL THE LEARNED COMMANDS IN A SINGLE DEVICE:
1Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five seconds.
2Move the cursor to 4. Learning with the joystick and then push the joystick down to enter the learning mode.
16