NAD HTR-5 manual Auto Scan with Brand Names

Page 12

PROGRAMMING THE REMOTE CONTROL

8Confirm that you entered the right code number that matches your component by pressing other buttons such as POWER, VOLUME, MUTE and CHANNEL. If any of the buttons do not operate as they should, please repeat from Step 5.

9Continue to program other components by repeating from the above step 5.

10Once you have completed programming all the devices, exit from the programming mode by pressing both the MAIN and PAGE buttons simultaneously.

11You will now be in the setting mode once again. Move the cursor to 8. TO EXIT and press the joystick down or simply press the MAIN button to exit to main menu.

AUTO SCAN WITH BRAND NAMES

	1	Manually turn on the component you plan to operate.
	2	Go to program setting mode in the remote control by pressing both the MAIN and
ENG		PAGE buttons simultaneously for five seconds.
ENG	3	Using the joystick, move the cursor down in the LCD screen to 3. PREPROGRAM.
	4	Push the joystick down to enter the preprogram mode.
	5	Select the device you wish to program in the LCD screen, (e.g. To program DVD, press
	6	the DVD device button).
	6	Select the device from which the three digit code number will be selected, (e.g. If it is
		from the DVD code table, press the DVD device button).

12

Image 12

Contents LCD Touch Screen Preprogrammed Learning Remote Control HTR-5ENG Table of Contents Introduction Battery Installation Summary of Operations Description of DevicesPRE-PROGRAMMED Codes Learning Macro Operation Punch ThroughEditing the Buttons on LCD Screen Loading ProgramALL Other Operations Power Mute Volume Channel LCD Screen and Button LayoutGetting Ready with System Setting Programming the Remote Control Preprogramming Method Using a THREE-DIGIT Code NumberAuto Scan with Brand Names ENG Continue to program other components by repeating from Step Learning MethodOriginal Remote To Erase ALL the Learned Commands in a Single Device To Erase the Learned Buttons To Erase a Single ButtonTo Erase ALL the Learned Commands in ALL Twelve Devices System and Operations Setup Setting UP the SystemSystem and Operations SET UP Macro and Punch Through ProgrammingMacro Programming To Program Macro FunctionsSystem Operations and SET UP For Device ButtonsFor Favorite Channel Button To Erase Macro FunctionsTo Program Punch Through Functions ProgrammingTo Erase Punch Through Functions To Edit the Buttons on the LCD To Move ButtonsTo Edit the Buttons on on LCD To Copy ButtonsTo Copy Creating a Favorite Device page Main To Edit the Buttons on LCD To Delete ButtonsTo Insert Buttons To Change Buttons To Edit a Text Clock Setting Loading Program Using a PCLCD Alignment LCD Screen ContrastWarranty Memory LockErasing ALL the Programs Specifications SET-UP Function Table Audio Button Name Audio FunctionsSatellite SET-UP Function Table Button Name SAT FunctionsSET-UP Function Table TV Button Name TV FunctionsVCR SET-UP Function Table Button Name VCR1,2 FunctionsButton Name FunctionsSET-UP Function Table Cable Button Name Cable FunctionsDVD SET-UP Function Table Button Name DVD FunctionsSET-UP Function Table CD Button Name CD FunctionsLaser Disc SET-UP Function Table Button Name LD FunctionsSET-UP Function Table Tape Button Name Tape FunctionsAUX SET-UP Function Table Button Name AUX FunctionsAUX Functions Button Name SET-UP Function Table Tuner Button Name Tuner FunctionsTuner Functions Button Name SET-UP Function Table SET-UP Code Table Audio Set-Up Code NumberAudio SET-UP Code Table SET-UP Code Table SAT TV SET-UP Code Table SET-UP Code Table TV VCR1 SET-UP Code Table SET-UP Code Table VCR1 Cable SET-UP Code Table SET-UP Code Table DVD CD SET-UP Code Table SET-UP Code Table CD LD SET-UP Code Table SET-UP Code Table Tape AUX SET-UP Code Table NAD Electronics International