D Connecting to an AV receiver equipped with a Dolby Digital
Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting this unit to an AV receiver with a Digital In jack. The supplied video cord is also available instead of a coaxial cord.
TV
yellow
to the video input jack (yellow)
Video cord (supplied)
to VIDEO OUT jack (yellow)
yellow 
Rear of the unit
DIGITAL | AUDIO | COMPONENT | AUDIO |
OUT | OUT 2 | VIDEO OUT | OUT 1 |
| L | Pb | L |
DIGITAL |
|
| COAXIAL |
|
| ||
OUT |
|
|
|
|
| ||
|
|
|
|
| R | Pr | R | |
|
| |||
| COMPONENT |
| Y |
|
| VIDEO | VIDEO | ||
OPTICAL | OUT | OUT |
| OUT |
to DIGITAL OUT | to DIGITAL OUT |
|
OPTICAL jack | COAXIAL jack |
|
| or Coaxial cord | to an AC outlet |
Optical cord (not supplied) | (not supplied) |
|
|
| |
to the digital input jack | Receiver equipped with a Dolby | |
Digital decoder |
| |
|
| |
PREPARATIONS
Front |
|
| Front |
speaker (L) |
|
| speaker (R) |
Surround speaker (L) | Center speaker | Subwoofer | Surround speaker (R) |
When your TV is equipped with an
En
Set the setup menu correctly after connecting!
Set the “TV Aspect” and “Digital Audio Output” of the setup menu according to the audio equipment and TV connected to the unit as follows:
(See “CHANGING SETUP VALUE” on page 38 for details.)
Digital Audio Output
DOLBY DIGITAL/PCM
TV Aspect
When your TV is a
When your TV is a
NOTE
If picture noise appears while playing
CAUTION
When connecting an AV receiver not equipped with a Dolby Digital decoder using an optical or coaxial connecting cord, do not select “DOLBY DIGITAL/PCM” in the “Digital Audio Output” of the setup menu.
Merely attempting to play a DVD may cause a screeching noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select “PCM” in the “Digital Audio Output.”
CONTINUE
ENGLISH 13
AIWA