PLAYBACK (CONTINUED)
When the menu screen is displayed
The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.
Use the i/k/j/l buttons to select the title/chapter you want to view, then press ENTER to start playback.
Press TOP MENU or MENU to return to the menu screen.
Still (Pause)
Press aduring playback.
To return to normal playback
Press c.
Use the number buttons to select the track you want to view.
Press vRETURN to return to the menu screen.
Menu settings and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on each menu screen.
Tip
The unit can switch on/off the PBC (Playback control) function in the setup menu. When PBC is turned off, Video CD is played back the same as an audio CD. To turn off PBC, see “CHANGING SETUP VALUE” on page 38.
To stop playback
Press s.
To turn the power off
Press POWER. The unit enters power standby mode and the 6STANDBY/ON indicator turns red.
If the unit is left for 8 minutes without any operations
The unit automatically enters standby mode.
NOTE
The disc continues to spin while the menu screen is displayed even if s is pressed. When you are finished using the unit, turn the power off after pressing s.
20 ENGLISH
Frame Advance
Press aduring pause.
Each time you press the button, the program advances one frame. There is no audio during Frame Advance playback.
To return to normal playback
Press c.
Resuming playback
The unit remembers the point where you stopped the disc and you can resume playback from that point.
Press c in stop mode.
To clear the resume point
Press s again after you stop the disc.
The resume point is also cleared when you press zOPEN/ CLOSE to open the disc tray, or POWER to turn the power off.
NOTE
During Video CD playback with PBC turned on, the resume function does not work.
To resume playback from the point where you stopped, turn off the PBC.
AIWA