Connecting to a TV or monitor with component video input connectors
TV or monitor
to video input jacks
(PB/PR/Y)
Video cables (not supplied)
PREPARATIONS
Set the VIDEO OUT switch to COMPONENT |
|
| to COMPONENT VIDEO |
|
|
| OUT (Pb/Pr/Y) jacks |
| |
|
|
| Rear of the unit | |
|
|
|
| |
| DIGITAL | AUDIO | COMPONENT AUDIO |
|
| OUT | OUT 2 | VIDEO OUT OUT 1 |
|
| COAXIAL | L | PbL |
|
DIGITAL |
|
|
| |
OUT |
|
|
|
|
| R | Pr | R | |
|
| |||
| COMPONENT |
| Y |
|
| VIDEO | VIDEO | ||
OPTICAL | OUT | OUT |
| OUT |
to an AC outlet
En
Before connecting!
Set the VIDEO OUT switch to COMPONENT when connecting to a TV with component video input jacks.
Tip
Video signals are always output from VIDEO OUT jack on the unit regardless of this setting.
Component video output jacks (PB/PR/Y)
The component video output jacks output the different color signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.
The description of the component video output connectors may differ depending on the connected TV or monitor (e.g. PB/PR/Y, CB/CR/Y,
Set the setup menu correctly after connecting!
Set the “TV Aspect” of the setup menu according to the audio equipment and TV connected to the unit as follows: (See “CHANGING SETUP VALUE” on page 38 for details.)
TV Aspect
When your TV is a
When your TV is a
NOTE
If picture noise appears while playing
ENGLISH 17
AIWA