CONNECTIONS
Before connection, identify the type of your audio equipment or of the TV set referring to the following chart. Then decide the connection and the setup menu according to the types.
NOTES
• The player cannot be connected to a TV set which is not equipped with a video input connector | . | ||||
• Use a commercially available |
| ||||
|
|
|
| ||
Audio system to be connected | Input jack of equipment to be |
| Referring | ||
| connected to the DVD player |
| Letter | ||
None (only the television is connected) |
|
|
|
| See A. |
|
|
|
| ||
A stereo system or an amplifier | Digital input jack |
| See B. | ||
| Analog audio input jacks (L/R) |
| See C. | ||
|
|
|
| ||
An AV receiver equipped with Dolby Digital | Digital input jack |
| See D. | ||
decoder or DTS decoder |
|
|
|
|
|
|
|
|
| ||
An AV receiver equipped with Dolby Pro Logic | Analog audio input jacks (L/R) |
| See E. | ||
Surround |
|
|
|
|
|
|
|
|
|
|
|
Before making connections
•Connect the AC cords of the unit and external equipment at the end, after finishing the other connections.
•Insert the plugs completely into the jacks. Loose connections may produce a humming sound or other noise interference.
•When using an optical connection, remove the dust cap from the DIGIT AL AUDIO OUT OPTICAL jack on the rear of this unit. Keep the cap in store. When not using optical connections, the dust cap should be in place.
•Refer to the instructions for the connected equipment.
For customers living in Burma, Cambodia, Philippines, Taiwan or Republic of Korea
In the above countries, TV broadcasting system is NTSC. To use this unit with the NTSC TV set, TV SYS in the setup menu of this unit must be changed to NTSC, after connecting. For more details, refer to "Basic operations" on page 32
and "TV SYS" on page 34.
CAUTION
Do not select “ BITSTREAM” in the “AUD OUT” when connecting to an AV receiver not equipped with a Dolby Digital decoder or DTS decoder (with an optical or coaxial connecting cord).
Merely attempting to play a DVD may cause a high level of noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select “DIGITAL PCM” in the “AUD OUT”.
NOTES
•When the picture noise appears while
connect through a VCR, TV/VCR or AV selector .
• For the speakers and their connection, refer to the instructions for the AV receiver .
CAUTION
Do not place heavy objects on this unit, otherwise disc tray of this unit may not be opened.
10 ENGLISH