CONNECTIONS (CONTINUED)
D Connecting to an AV receiver equipped with a Dolby Digital
Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an | AV receiver with | ||
a Digital In jack. The supplied video cord is also available instead of the coaxial cord. |
|
| |
| TV set |
|
|
| to a video input jack |
|
|
| (yellow) |
|
|
| Video cord |
|
|
| (supplied) |
|
|
| yellow |
|
|
yellow | to VIDEO OUT 1 or 2 |
|
|
| jack (yellow) | Rear of the unit |
|
Rear of the unit
AUDIO OUT
VIDEO
OUT
RL
| COAXIAL OPTICAL |
| DIGITAL |
| AUDIO OUT |
| to DIGITAL AUDIO |
to DIGITAL AUDIO | OUT OPTICAL jack |
OUT COAXIAL jack |
|
Optical cord (not supplied)
to an AC outlet
Coaxial cord | to a digital input jack |
(not supplied) |
Receiver equipped with a Dolby
Digital decoder or DTS decoder
Front speaker (L)
Front speaker (R)
Surround speaker (L) | Center speaker | Subwoofer | Surround speaker (R) |
When your TV set is equipped with an
Set the setup menu correctly after connecting! |
| NOTE | |
According to the audio equipment and TV set to which this |
| When the picture noise appears while | |
unit is connected, set the “AUD OUT” and “TV TYPE” of |
| ||
| are played, connect the unit directly to a TV set. Do not | ||
the setup menu correctly referring to the following below | . | ||
connect through a VCR, TV/VCR or AV selector . | |||
See “CHANGING SETUP VALUE” on page 32 in detail. |
| ||
|
|
AUD OUT
[BITSTREAM]
TV TYPE
When your TV set is a
[4:3 LB 
]
When your TV set is a
[16:9 
]
14 ENGLISH
CAUTION
If the AV receiver is not equipped with a Dolby Digital or DTS decoder, do not select “BITSTREAM” in the “AUD OUT” when connecting the AV receiver with an optical or coaxial connecting cord.
Merely attempting to play a DVD may cause a high level of noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select “DIGITAL PCM” in the “AUD OUT”.