REMOTE CONTROL
Installing batteries
Detach the battery cover on the rear of the remote control, and insert two R6 (size AA) batteries with 0and 9aligned correctly .
When to replace the batteries
The maximum operational distance between the remote control and the sensor of the units should be approximately
7 meters. If this distance decreases, replace the batteries with new ones.
NOTES
• When operating with the remote control, point the top of the remote control toward the player .
•If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.
•The remote control may not operate correctly when:
-The line of sight between the remote control and the unit is exposed to intense light, such as direct sunlight.
-There is fluorescent lighting near the remote sensor in
the display window .
-Other remote controls are used nearby (those of a TV set, etc.).
ABOUT SYMBOLS 
Although this unit can play DVDs, super video CDs, V ideo |
| ||
CDs, Audio CDs or MP3 discs, some of the functions are |
| ||
restricted by the kinds of discs. |
| ||
In this operating instructions, the following symbols are used |
| ||
to make distinction. | PREPARATIONS | ||
: | Shows the function or the display for only | ||
| |||
| DVDs. |
| |
: | Shows the function or the display for only super |
| |
| video CDs. |
| |
: Shows the function or the display for only video CDs.
: Shows the function or the display for only audio CDs.
: Shows the function or the display for only MP3 discs.
No symbols: The function works in common.
About the 
symbol display
• The 
symbol will be displayed on TV screen if you press a button which cannot be used or enter an incorrect number.
•Some discs may have places where they do not allow pressing of the STOP, SKIP, or other buttons. The 
mark will be displayed on the screen if you press a button that is not allowed in such a place.
En
ENGLISH 17