Aiwa XD-DV270 operating instructions Connections, Digital PCM

CONNECTIONS (CONTINUED)

B Connecting to a TV set and an amplifier with a Digital In jack

Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an amplifier with a

Digital In jack. The supplied video cord is also available instead of the coaxial cord.

TV set

	to a video input	yellow
	jack (yellow)
	Video cord
	(supplied)
	yellow
yellow	to VIDEO OUT 1 or 2
	jack (yellow)	Rear of the unit

AUDIO OUT

VIDEO S-VIDEO

OUT

RL

	COAXIAL OPTICAL
		DIGITAL
		AUDIO OUT
to DIGITAL		to DIGITAL AUDIO
		OUT OPTICAL jack
AUDIO OUT
COAXIAL jack		Optical cord (not supplied)	to an AC outlet

Coaxial cord (not supplied)

to a digital input jack

Front	Amplifier with a Digital In jack	Front
speaker (L)		speaker (R)

When your TV set is equipped with an S-video input terminal, see page 16.

Set the setup menu correctly after connecting!		TV TYPE
According to the audio equipment and TV set to which		When your TV set is a conventional-screen size TV:
this unit is connected, set the “AUD OUT” and “TV TYPE”
		[4:3 LB		]
of the setup menu correctly referring to the following below	.
		When your TV set is a wide-screen size TV:
See “CHANGING SETUP VALUE” on page 32 in detail.
AUD OUT		[16:9
			]
[DIGITAL PCM]

NOTE

When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector .

12 ENGLISH