Alpine DVA-9861 owner manual Switching the Audio Tracks, Switching the Angle, 19-EN

Page 21

VIDEO CD

The track is played repeatedly.

The entire disc is played repeatedly (Factory default)

Playback does not repeat.

*1 Set “VCAP” or “VOFF” in Custom Setup. For detail, refer to “Setting the DVD Audio Playback Mode” (page 31).

*2 Displayed only in the changer mode.

The track/disc repeat modes cannot be used on video CDs with playback control (PBC). Set VCD PLAY MODE to turn the PBC function off. Refer to “Setting the Video CD Play Mode” (page 31).

For some discs it is not possible to switch the repeat mode.

During DVD Video playback, pressing and holding 4 for at least 2 seconds will change the unit to REPEAT OFF.

Switching the Audio Tracks

For discs with multiple audio or audio languages, you can switch the audio language temporarily during playback.

This operation is performed by the remote control unit.

During playback, press AUDIO.

The sound switches between the alternate audio tracks recorded on the disc each time the button is pressed.

The selected audio track becomes the default setting every time the power is turned on or the disc is replaced. If a disc does not include the language you selected for the default audio track, the disc’s default language is selected instead. Refer to “Setting the language” (page 27).

Not all discs will allow changing the alternate audio tracks during playback. In these cases, select audio tracks from the DVDs menu.

There may be a delay before the selected alternate track begins to play.

DVD-VR/Video CDs with multiplex audio

DVD-VR

During playback, press and hold AUDIO for at least 2 seconds.

The left and right channels will be output as shown below, each time the button is pressed.

LR LL RR LR

Video CD

During playback, press AUDIO.

The left and right channels will be output as shown below, each time the button is pressed.

LR LL RR LR

Switching the Angle

On DVDs in which scenes have been filmed from multiple angles, the angle can be switched during playback.

This operation is performed by the remote control unit.

During playback, press ANGLE.

The angle switches between the angles recorded on the disc each time the button is pressed.

Some time may be required for the angle to change.

Depending on the disc, the angle may switch in one of two ways.

-Seamless: The angle switches smoothly.

-Non-seamless: When the angle is switched, a still picture is displayed first, after which the angle switches.

If the DVD-Audio disc is set to “VCAP”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” (page 31).)

Switching the Subtitles (subtitle language)

With multiple subtitle language DVDs, the subtitle language can be switched during playback, or subtitles can be hidden.

This operation is performed by the remote control unit.

During playback, press SUBTITLE.

The subtitle switches between the languages recorded on the disc and OFF each time the button is pressed.

During DVD-VR playback, the display of the subtitle is set to ON or OFF.

There may be a delay before the selected subtitle appears.

Not all discs will allow changing the subtitles during playback. In these cases, select subtitles from the DVD’s menu.

The selected subtitle language becomes the default setting every time the power is turned on or the disc is replaced. If a disc does not include that language, the disc’s default language is selected instead. Refer to “Setting the language” (page 27).

For some discs, the subtitles will be displayed even when this is set to off.

If the DVD-Audio disc is set to “VCAP”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” (page 31).)

Tips

Switching from the disc menu.

For some discs, the audio language, angle and subtitles can be switched from the disc menu.

DVD Video

1.Press MENU, select the item, then press ENT.

2.Press , , or to select the language or angle, then press ENT.

(For some discs, they can be selected using the numeric keypad “0” to “9” while the language or the angle menu is displayed.)

DVD Audio

1.Press and hold DISP./TOP M., select the item, then press ENT.

2.Press , , or to select the language or angle, then press ENT.

(For some discs, they can be selected using the numeric keypad “0” to “9” while the language or the angle menu is displayed.)

If the DVD-Audio disc is set to “VCAP”, operation can be performed. (Refer to “Setting the DVD Audio Playback Mode” (page 31).)

19-EN

Image 21
Contents DVA-9861 CHM-S630 CHA-S634 CHA-1214 Alpine CD Changers Give You MoreContents Operating Instructions Setup IPod Optional PrecautionsOperating Instructions Never Attempt the Following Audio + Video 12 cm Discs playable on this unitOn handling compact discs CD/CD-R/CD-RW Press SOURCE/POWER to turn on the unit Turning Power On and OffGetting Started About the alphanumeric display of this unitAdjusting Volume Setting TimeLowering Volume Quickly Initial System Start-UpAutomatic Memory of Station Presets Manual Storing of Station PresetsTuning to Preset Stations RadioFrequency Search Function Switching the HD Radio signalPlayback 11-ENRepeat Play X. Random Play12-EN Searching from CD Text Remote Control OperationFile/Folder Name Search Concerning MP3/WMA About MP3/WMA14-EN TerminologyDVD/Video CD Playing a Disc15-EN Searching by Playlist Searching by ProgramStopping Playback PRE-STOP Stopping PlaybackSelecting Program/Playlist Playing Still Frames pausingSlow Motion Playback Searching by Title NumberSearching by Program or Playlist Number Searching by Group NumberRepeat Playback 18-ENSwitching the Angle Switching the Audio TracksDVD-VR/Video CDs with multiplex audio 19-EN20-EN Displaying the Disc StatusSound Setting Setting the Bass ControlRear/Defeat Setting the BBE Mode Setting the Treble ControlSetting the Treble Center Frequency Setting the Treble LevelOther Functions Displaying the Text23-EN Setting the Wallpaper Blackout Mode On and OffDisplaying Time Sound CustomizingVisual Customizing External Device25-EN DVD Setup DVD Setup Operation26-EN Setting the language When the setting is complete, press SetupSetting the TV Screen Setting the Country CodeSetting the Rating Level Parental Lock Setting item Parental Further setting item Parental Level28-EN Audio Setup Operation Audio SetupPress or to change the setting, then press ENT 29-EN30-EN Setting the Downmix ModeCustom Setup Custom Setup Operation31-EN Receiving Channels with the SAT Radio Receiver Optional SAT Radio Receiver OptionalChecking the SAT Radio ID Number 32-ENStoring Channel Presets Setting the Tuning MethodReceiving Stored Channels Channel/Category Search FunctionQuick Search Function Setting the Auxiliary Data Field DisplayReceiving Weather or Traffic information from SAT Radio Changing the DisplayAdjustment Procedure for Dolby Surround External Audio Processor Optional35-EN Set MX Mode of the External Audio Processor Setting the Speakers36-EN Select ON/OFF of MX by pressing orSelect the desired channel by pressing or , then press Mode Over AdjustmentCalculating the Time Correction 37-ENSwitching the Phase Graphic Equalizer AdjustmentsCheck that Defeat mode is off Inputting the Time CorrectionParametric Equalizer Adjustments 39-ENPress Band to select the band Setting Bass Focus Setting Bass CompressorSpeaker Setup 40-ENAdjusting the speaker levels Setting of Dolby DigitalAdjusting the acoustic image Mixing bass sound to the rear channelUsing the Pro Logic II Mode Adjusting the DVD LevelAchieving powerful high volume sound Adjust the level Level by turning the Rotary encoderStoring Settings in the Memory Linear PCM SettingRecalling the Preset Memory Confirming the current Preset No./EQ mode44-EN Remote Control OperationSearching for a desired Song IPod OptionalSearching by Playlist Searching by artist nameSelect Playlist/Artist/Album Direct Search FunctionSearching by album name Searching by song nameQuick Search Random Play Shuffle M.I.X47-EN Controlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control Controls on Remote Control49-EN 50-EN When Using the Remote Control Battery Replacement51-EN About DVDs InformationTerminology Dolby DigitalLinear PCM audio Lpcm Dolby Pro LogicRating levels parental lock 53-ENList of Language Codes 54-ENFor details, see 55-EN List of Country Codes56-EN Basic Case of DifficultyRadio CD/MP3/WMA/DVD/Video CDAudio Indication for CD Player58-EN Indication for DVD/Video CD Player Indication for Changer59-EN Indication for iPod Mode Indication for SAT Receiver Mode60-EN 61-EN Specifications62-EN Installation and ConnectionsAccessory List InstallationInstall the Detachable Front Panel 63-EN64-EN RemovalPull the unit out, keeping it unlocked as you do so 65-EN Connections66-EN Please observe the following when using Fiber Optic Cable System Example67-EN Page Page