Alpine DVA-9861 Linear PCM Setting, Storing Settings in the Memory, Recalling the Preset Memory

Page 45

5When the setting is complete, press and hold MUTE for at least 2 seconds.

The unit returns to the normal mode.

•This adjustment is effective when the setting of the center speaker is SMALL or LARGE in the speaker setup settings.

•Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of this unit while making this adjustment. The setting is canceled if the Decode mode is switched.

•This adjustment is ineffective when the speaker is set to CENTER “OFF” in “Setting the Speakers” (page 36).

•This function only works with two-channel signals. This operation is ineffective when 5.1-channel DTS or Dolby Digital signals are input.

•If the setting of REAR FILL is made when REAR MIX is ON, sound is unchanged in the rear fill setting because REAR MIX is given priority during 2 channel decoder other than linear PCM.

•For linear PCM signals, the voice is output from the rear speaker regardless of the REAR FILL and REAR MIX setting.

•When the setting is complete, it is recommended to store the setting contents. For storing, refer to page 43.

Linear PCM Setting

The output when playing discs recorded in linear PCM can be set to 2 or 3 channels.

1Check that Defeat mode is off (page 21).

2Press and hold MUTE for at least 2 seconds.

The audio processor control mode is activated.

3Select PCM MODE by pressing MUTE repeatedly.

4Select 2 CH or 3 CH by turning the Rotary encoder.

2CH: 2ch output (L/R)

3CH: 3ch output (L/R/CENTER)

5When the setting is complete, press and hold MUTE for at least 2 seconds.

The unit returns to the normal mode.

•This adjustment is ineffective when the speaker is set to CENTER “OFF” in “Setting the Speakers” (page 36).

Storing Settings in the Memory

Up to 6 set and adjusted contents can be stored on the unit.

All that are setting and adjusting items described below are stored in one preset memory.

Setting/adjusting items

Refer to page

Setting the Speakers

36

 

 

Setting Time Correction/Switching Phase/

37, 38, 40

Setting the Bass Focus

 

 

 

Adjusting EQ

38, 39

 

 

Adjusting X-OVER

37

 

 

Setting MX

36

 

 

Setting BASS COMP.

40

 

 

Setting PRO LOGIC II/Adjusting the Center

42

Width*

 

 

 

Adjusting Dolby Surround*

41, 42

 

 

Linear PCM Setting*

43

 

 

* Depending on the input signal, sound effect may not be obtained.

1Adjust and set the value to be stored.

2Press and hold for at least 2 seconds any one of the preset buttons (1 through 6) into which you want to store the set/adjusted value as preset memory (MEMORY 1 through MEMORY 6).

•This function is operable only when Defeat is set to OFF.

•The stored contents will not be deleted even when battery power cord is detached.

Recalling the Preset Memory

1Check that Defeat mode is off (page 21).

2Press and hold MUTE for at least 2 seconds.

The audio processor control mode is activated.

3Press any one of the buttons to select the preset memory (MEMORY 1 through MEMORY 6) you want to recall.

It takes a few moment to get out the preset memory.

Confirming the current Preset No./EQ mode

1Press and hold MUTE for at least 2 seconds.

The audio processor control mode is activated.

2Press MUTE repeatedly to select PRESET INFO.

The current preset number and EQ mode appear in the display.

Preset No.

EQ setting display is shown.

Displays which EQ, graphic EQ or parametric EQ is currently set.

G:Graphic EQ

P:Parametric EQ

3Press and hold MUTE for at least 2 seconds to complete confirmation.

The unit returns to normal mode.

43-EN

Page 44 Page 46
Image 45
Page 44 Page 46
Contents DVA-9861 CHM-S630 CHA-S634 CHA-1214 Alpine CD Changers Give You MoreContents Operating Instructions Setup IPod Optional PrecautionsOperating Instructions Never Attempt the Following Audio + Video 12 cm Discs playable on this unitOn handling compact discs CD/CD-R/CD-RW Press SOURCE/POWER to turn on the unit Turning Power On and OffGetting Started About the alphanumeric display of this unitAdjusting Volume Setting TimeLowering Volume Quickly Initial System Start-UpAutomatic Memory of Station Presets Manual Storing of Station PresetsTuning to Preset Stations RadioFrequency Search Function Switching the HD Radio signalPlayback 11-ENRepeat Play X. Random Play12-EN Searching from CD Text Remote Control OperationFile/Folder Name Search Concerning MP3/WMA About MP3/WMA14-EN TerminologyDVD/Video CD Playing a Disc15-EN Searching by Playlist Searching by ProgramStopping Playback PRE-STOP Stopping PlaybackSelecting Program/Playlist Playing Still Frames pausingSlow Motion Playback Searching by Title NumberSearching by Program or Playlist Number Searching by Group NumberRepeat Playback 18-ENSwitching the Angle Switching the Audio TracksDVD-VR/Video CDs with multiplex audio 19-EN20-EN Displaying the Disc StatusSound Setting Setting the Bass ControlRear/Defeat Setting the BBE Mode Setting the Treble ControlSetting the Treble Center Frequency Setting the Treble LevelOther Functions Displaying the Text23-EN Setting the Wallpaper Blackout Mode On and OffDisplaying Time Sound CustomizingVisual Customizing External Device25-EN DVD Setup DVD Setup Operation26-EN Setting the language When the setting is complete, press SetupSetting the TV Screen Setting the Country CodeSetting the Rating Level Parental Lock Setting item Parental Further setting item Parental Level28-EN Audio Setup Operation Audio SetupPress or to change the setting, then press ENT 29-EN30-EN Setting the Downmix ModeCustom Setup Custom Setup Operation31-EN Receiving Channels with the SAT Radio Receiver Optional SAT Radio Receiver OptionalChecking the SAT Radio ID Number 32-ENStoring Channel Presets Setting the Tuning MethodReceiving Stored Channels Channel/Category Search FunctionQuick Search Function Setting the Auxiliary Data Field DisplayReceiving Weather or Traffic information from SAT Radio Changing the DisplayAdjustment Procedure for Dolby Surround External Audio Processor Optional35-EN Set MX Mode of the External Audio Processor Setting the Speakers36-EN Select ON/OFF of MX by pressing orSelect the desired channel by pressing or , then press Mode Over AdjustmentCalculating the Time Correction 37-ENSwitching the Phase Graphic Equalizer AdjustmentsCheck that Defeat mode is off Inputting the Time CorrectionParametric Equalizer Adjustments 39-ENPress Band to select the band Setting Bass Focus Setting Bass CompressorSpeaker Setup 40-ENAdjusting the speaker levels Setting of Dolby DigitalAdjusting the acoustic image Mixing bass sound to the rear channelUsing the Pro Logic II Mode Adjusting the DVD LevelAchieving powerful high volume sound Adjust the level Level by turning the Rotary encoderStoring Settings in the Memory Linear PCM SettingRecalling the Preset Memory Confirming the current Preset No./EQ mode44-EN Remote Control OperationSearching for a desired Song IPod OptionalSearching by Playlist Searching by artist nameSelect Playlist/Artist/Album Direct Search FunctionSearching by album name Searching by song nameQuick Search Random Play Shuffle M.I.X47-EN Controlling CD Changer Optional Changer OptionalPlaying MP3 Files with the CD Changer Optional Multi-Changer Selection OptionalRemote Control Controls on Remote Control49-EN 50-EN When Using the Remote Control Battery Replacement51-EN About DVDs InformationTerminology Dolby DigitalLinear PCM audio Lpcm Dolby Pro LogicRating levels parental lock 53-ENList of Language Codes 54-ENFor details, see 55-EN List of Country Codes56-EN Basic Case of DifficultyRadio CD/MP3/WMA/DVD/Video CDAudio Indication for CD Player58-EN Indication for DVD/Video CD Player Indication for Changer59-EN Indication for iPod Mode Indication for SAT Receiver Mode60-EN 61-EN Specifications62-EN Installation and ConnectionsAccessory List InstallationInstall the Detachable Front Panel 63-EN64-EN RemovalPull the unit out, keeping it unlocked as you do so 65-EN Connections66-EN Please observe the following when using Fiber Optic Cable System Example67-EN Page Page
Top Page Image Contents