4 Repeat the procedure to store up to 5 other stations onto the same band.
To use this procedure for other bands, simply select the band desired and repeat the procedure.
A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, MW and LW).
NOTE
If a preset memory has already been set in the same preset location, it will be cleared and the new station will be memorized.
Automatic Memory of Station Presets
1 Press the SOURCE button until the frequency appears in the display.
2 Press the BAND button until the desired radio band appears in the display.
Each press changes the radio bands as follows:
→ F1 → F2 → MW → LW
3 Press and hold the A. ME. button for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in process.
The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength.
When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press the SOURCE button until the frequency appears in the display.
2 Press the BAND button repeatedly until the desired band is displayed.
Each press changes the radio bands as follows:
→ F1 → F2 → MW → LW
3 Make sure that the function indicator at the top side of the "F" button illuminates, then press the station preset button that has your desired radio station in memory.
The display shows the band, preset number with a triangle and frequency of the station selected.
