Indication for CD Changer
HI TEMP
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
ERROR - 01
•Malfunction in the CD Changer.
-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.
Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.
ERROR - 02
•A disc is left inside the CD Changer.
-Press the Eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
NO MAGZN
•No magazine is loaded into the CD Changer. - Insert a magazine.
NO DISC
•No indicated disc.
- Choose another disc.
Specifications
FM TUNER SECTION
Tuning Range | 87.5 – 108.0 MHz |
Mono Usable Sensitivity | 0.7 µV |
50 dB Quieting Sensitivity | 1.1 µV |
Alternate Channel Selectivity | 80 dB |
65 dB | |
Stereo Separation | 35 dB |
MW TUNER SECTION |
|
Tuning Range | 531 – 1,602 kHz |
Sensitivity (IEC Standard) | 25.1 µV/28 dB |
LW TUNER SECTION |
|
Tuning Range | 153 – 281 kHz |
Sensitivity (IEC Standard) | 31.6 µV/30 dB |
TAPE PLAYER SECTION |
|
Tape Speed | |
Wow & Flutter | 0.06% WRMS |
| |
With Dolby |
|
68 dB | |
Without Dolby NR | 60 dB |
Frequency Response |
|
With Alpine Test Tape | |
REMOTE CONTROL |
|
|
|
Battery Type | AAA batteries (2 pcs.) |
REMOTE CONTROL SIZE |
|
| |
Width | 56 mm |
Height | 14 mm (9/16") |
Depth | 105 mm |
Weight | 50 g (1.8 oz) |
GENERAL |
|
Power Requirement | 14.4 V DC |
| |
Maximum Power Output* | 45 W ⋅ 4 |
Maximum | 2 V/10k ohms |
Bass | ±15 dB at 30 Hz |
Treble | ±10 dB at 10 kHz |
Weight | 1.4 kg (3 lbs. 1 oz) |
CHASSIS SIZE |
|
Width | 178 mm (7") |
Height | 50 mm (2") |
Depth | 155 mm |
NOSEPIECE SIZE |
|
Width | 170 mm |
Height | 46 mm |
Depth | 19 mm (3/4") |
*Under maximum operating voltage and input signal, into 4 ohms.
Due to continuous product improvement, specifications and design are subject to change without notice.