Alpine TDM-7580R CD Changer Operation, Music Sensor M.S. Skip, Fast Forward and Backward

CD Changer Operation

SOURCE

Preset buttons

DN g -/Jf UP

Controlling CD Changer (Optional) Music Sensor (M.S.) Skip

If an optional Alpine 6-disc CD Changer (M-Bus) is connected to the 8-pin DIN connector of the TDM-7583R/TDM-7581R/TDM-7580R you can control the CD Changer using the TDM-7583R/ TDM-7581R/TDM-7580R.

NOTE

The CD controls on the TDM-7583R/TDM-7581R/TDM- 7580R for the CD operation are functional only when the CD Changer is interconnected with the TDM-7583R/ TDM-7581R/TDM-7580R.

1 Press the SOURCE button to activate the CD Changer.

The display shows the disc number and track number.

2 Make sure that the Function indicator illuminates, then press the Preset buttons to select the desired disc loaded in the CD Changer.

3 To pause playback, press the -/Jbutton. Pressing the -/Jbutton again will resume playback.

NOTES

•If the "F" indicator is illuminated the Disc Select buttons become nonfunctional.

•Press the SOURCE button to activate the CHANGER mode.

•Only compact discs containing the mark shown can be used.

•We cannot fully guarantee the playback of CD-R (CD- Recordable). You cannot playback CD-RW (CD- ReWritable) on this unit.

1 Press the DN g button once to return to the beginning of the current track.

If you wish to return to the beginning of a track further back, repeatedly press until you reach the desired track.

Press the f UP button once to advance to the beginning of the next track.

If you wish to advance to a track further ahead, press repeatedly until the desired track is reached.

NOTE

The music sensor feature is functional in the play or pause mode.

Fast Forward and Backward

1 Press and hold the DN g or f UP button to quickly move backward or forward respectively until you reach the desired portion.

NOTE

This feature works only in the CD playback mode.

13-EN