INITIAL SETTING
UP
NOTE: Most people will not adjust the following functions and will go directly to Page 18 for basic play.
LEFT
Select TV screen type
1 After entering the initial setting, press the DIRECTION buttons ( 
, 
, 
& 
) to
DOWN
select “Video” item.
2Press the SELECT button to open the Video menu.
3 Press the DIRECTION buttons ( 
, 
, 
& 
) again to select “TV Shape”, then
press SELECT button to open submenu of TV Shape.
4 X 3 Letterbox (4:3 LB) - Choose this setting if you want to see movies in their original aspect ratio
4 X 3 Standard (4:3 PS) - Choose this setting if you want to see movies to fill the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won’t be seen.
Most discs produced in a widescreen format can’t be cropped in this fashion.
This means the black bars will appear at the top and the bottom of the screen.
16 X 9 Widescreen (16:9) - Choose this setting if your DVD Player is connected to a widescreen TV. If you choose this setting and you don’t have a widescreen TV, the images on the screen may appear distorted due to vertical compression (faces may seem long and thin).
If you play a disc recorded in 4 X 3 format on a widerscreen TV, the left and right side of the screen will appear black.
Press STOP button and SETUP button to change to 4:3 ratio or match the type of TV you have.
4Select the TV shape you want using the UP & DOWN buttons ( 
, 
), press SELECT button to confirm.
NOTE: The factory settings for TV shape is “ 4:3 PS ”
RIGHT
SELECT BUTTON
5Note VIDEO is preset to NTSC USA normal standard at the factory.
6 To exit the Video setting menu, press the UP button to return back to the initial setting menu, or press the SETUP
button to close the menu and exit the initial setting directly.
16 |
| |
|