Lenoxx Electronics DVD-2002 instruction manual Basic Play, To Load and Play a Disc

1. BASIC PLAY

To Load and Play a Disc

NOTE: We call any DVD or AUDIO CD as “disc” in this booklet.

Turn on the TV and DVD player ( press ON/OFF on the player or press the POWER button on the remote control in STANDBY mode).

1 Press the OPEN/CLOSE button on the front of the DVD player or the EJECT button on the REMOTE, wait a few seconds, the disc tray will open.

2 Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

		t M
	ea		o	vi
r
G				e
Gr				ie
		eat Mov

This is an example of a one-sided disc.

3Press the OPEN/CLOSE or PLAY button, the disc tray will close.

The DVD player reads the disc’s table of contents (this may take a few seconds) with a loading icon “” on the left upper corner of the screen, and then one of the three things happens depending on how the disc was programmed:

•The disc starts playing.

•The disc menu appears on the screen. One of the options will be “Start Disc Play”. Highlight that option and press the SELECT button or PLAY button.

•The DVD Player’s main menu appears on the screen. Highlight the Play option and press SELECT button.

		reen ve
		idesc	rsion
u	p	(w		s)c
					a
					n
h					't
c					a c
ac
t
		t'	pu	hct
		nac

This is an example of a 2-sided disc. The title is in the center.

Open Close Loading Play

4Press VOLUME UP or DOWN button to adjust the volume level on your TV’s REMOTE and DVD’s

REMOTE.

5Press STOP button to stop play.

NOTE: When player is stopped, the display will show “Pre Stop”, the player records the point where STOP was pressed (RESUME function). Press PLAY again, playback will resume from this point. When the tray is opened or STOP is pressed again, the return function will be cleared and the set is fully stopped.

6After play, press OPEN/CLOSE or EJECT button to open the tray and take the disc out of the disc tray.

18 IB-DVD-2002-WC-ZR-E-V1