Sony AVD-S50ES 25US, Specifying the speaker parameters, xSIZE, Getting Started

Page 25

Specifying the speaker parameters

Specifying the speaker parameters

To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Use the test tone to adjust the speaker volumes to the same level.

You may adjust the speaker parameters using SPEAKER SETUP in the setup display (page 69).

Getting Started

C/X/x/c/ENTER

AMP MENU

To specify the size, distance, position and height of the speakers

1 Press AMP MENU repeatedly to display 9 SP. SETUP on the front panel display. 2 Sit in your listening position and select the item to be set using X/x.

•Items set in 9 SP. SETUP

–Size of 5 speakers (front L/R, center, rear L/R)

–with or without the center and rear L/R speakers and subwoofer

–Distance of the front, rear, and center speakers

–Position and height of the rear speakers

3 Set the parameter using C/c.

The selected parameter will appear on the front panel display.

4 Repeat Steps 2 and 3 to set other parameters in 9 SP. SETUP.

If you do not operate the remote for a few seconds, the parameter disappears from the display and is stored in the receiver.

xSIZE

When you do not connect center or rear speakers or subwoofer, set the parameters for F.SP., C.SP., R.SP., and S.W. The default settings are underlined.

• F.SP. (front speaker)

–LARGE: Normally select this.

–SMALL: Select this if the small speakers are used for the front speaker.

•C.SP. (center speaker)

–LARGE: Normally select this.
– SMALL: Select this if the small speaker is used for the center speaker.
– NO: Select this if no center speaker is used.	continued
	continued

25US

Image 25

Contents Mode d’emploi Operating instructionsSuper Audio CD DVD RECEIVER AVD-S50ESFor the customers in the U.S.A Note to CATV system installerFor the customers in Canada Owner’s RecordPrecautions WelcomeSafety InstallingOn safety PrecautionsOn placement On adjusting volumePlaying Discs Getting StartedSearching for a Scene Viewing Information About the DiscUsing Various Additional Functions Sound AdjustmentsSettings and Adjustments Enjoying MoviesThis receiver Can Play the Following Discs About this ManualTerms for discs TitleExamples of discs that the receiver cannot play Region codeNote on PBC Playback Control VIDEO CDs Note on playback operations of DVDs and VIDEO CDs Notes about the DiscsCopyrights On handling discs10US Index to Parts and ControlsFront Panel When listening to the radio When playing back a DVD11US Front Panel DisplayRear Panel 12USRemote 13US14US Guide to the Control Menu DisplayControl Menu List of Control Menu ItemsAUDIO DVD/VIDEO CD 15USSuper Audio CD/CD only page SUBTITLE DVD only pageUnpacking Quick Overview16US Getting StartedStep 1 Speaker System Hookup Inserting Batteries into the Remote17US Getting Started18US Terminals for connecting the speakersConnect the To theTo avoid short-circuitingthe speakers 19USExamples of poor conditions of the speaker cord Getting StartedStep 2 Antenna Hookups Terminals for connecting the antennas20US Connect theGetting Started 21USzIf you have poor FM reception S Video cord for connecting a TV monitor Jacks for connecting video componentsStep 3 TV and Video Component Hookups 22US23US Connecting the AC Power Cord mains leadGetting Started When color irregularity occurs on the TV screen Speaker Setup24US Specifying the speaker parameters 25USxSIZE Getting StartedxDISTANCE 26USSpecifying the rear speaker position and height To specify the balance and level of the speakers 27USxBALANCE Getting Started28US Other AMP MENU settingsxLEVEL xDIMMER29US Presetting Radio Stations3Press MEMORY Getting StartedTo change the preset number To tune in a station with a weak signalTo change the AM tuning interval 30USPlaying Discs 3 Press POWER on the receiver31US 1 Turn on your TVTo cancel standby mode Saving the power in standby mode32US Additional operations33US Using the DVD’s MenuPlaying Discs 1 Press TOP MENU/GUIDE or AV MENU34US Playing VIDEO CDs with PBC Functions PBC Playback1 Start playing a VIDEO CD with PBC functions To go back to the menu5 Select a track using X/x and press ENTER 4 Select TRACK using X/x and press ENTERPlaying an MP3 Audio Track 35US36US Creating Your OwnProgram Program Play About MP3 audio tracks37US To cancel the programmed order2 Press c 3 Select the track you want to programPlaying in random order Setting the shuffle mode on the Control Menu38US Shuffle PlayWhen playing a DVD 3 Select the Repeat Play settingWhen playing a VIDEO CD/Super Audio CD/CD/MP3 and when Programmotion Play 40USWatching frame by frame Slow motion play Searching for a ScenexWhen playing a VIDEO CD xWhen playing a DVDxWhen playing a Super Audio CD xWhen playing a CD42US using the time code TIME SEARCHSearching for a chapter/index To search for a particular point43US When playing a VIDEO CD withoutPress TIME Viewing Information About the DiscChecking the Playing Time and Remaining Time When playing an MP344US 1 Press DVD DISPLAY during playback45US xWhen playing a VIDEO CD with PBC functionswithout PBC functions, Super Audio CD or CD xWhen playing a DVDSound Adjustments 3 Press X/x to select the desired audio signalxWhen playing a VIDEO CD, or CD Changing the SoundDOLBY DIGITAL Sound Adjustments47US Displaying the audio information of the disc48US Enjoying Surround SoundDecoding About DCS Digital Cinema SoundEnjoying movies with Cinema Studio EX 49USSound Selecting other sound fieldsN. SURROUND Normal Surround 50USHALL Hall JAZZ CLUB Jazz ClubAdjusting the level Using only the front4 Adjust the volume level using C/c parameters52US Changing the Angles3 Press c or ENTER 2 Press X/x to select ANGLEDisplaying the Subtitles To cancel the SUBTITLE setting53US 3 Press X/x to select the languagexWhen you have not entered a password Using Various Additional FunctionsxWhen you have already registered a password Locking Discs CUSTOMTo change the password If you make a mistake entering your password55US Playing the disc for which CustomxIf you have not entered a password 1 In stop mode, press DVD SETUP56US xWhen you have already registered a passwordentering your password To turn off the Setup Display57US Playing the disc for which ParentalArea Code 58USStandard Code59US 1 Press TV /1 and RM SETUP simultaneouslyControlling TVs with the remote Other Operations60US 1 Press AV /1 and RM SETUP simultaneouslyControlling satellite receivers with the remote Controlling the TV61US Using the Video or other Unitdisplay Controlling the satellite receiverTo listen to non-presetradio stations 3 Adjust the volume by pressing VOLUME +Listening to the Radio 62US63US Naming Preset Stations3 Press NAME 5 Press ENTERHow to use the Setup Display Using the Setup DisplaySettings and Adjustments 3 Select an item using X/x, then press ENTER or cLANGUAGE SETUP Setting the Display or Sound Track Language4 Select a setting using X/x, then press ENTER 65USSCREEN SETUP Settings for the Display66US xTV TYPE DVD only67US Settings and AdjustmentsxCOMPONENT OUT xSCREEN SAVERSETUP Custom Settings CUSTOM68US xPARENTAL CONTROL t DVD onlySPEAKER SETUP Settings for the SpeakersTo return to the default setting 69USxDISTANCE 70USxLEVEL Adjustments Adjusting the speaker volume and levelTo adjust the volume of all the 71USPower TroubleshootingThe power is not turned on in “TV TYPE” of “SCREEN SETUP,”Operation 73USThe left and right sounds are unbalanced or reversedThe disc does not play 74USThe MP3 audio track cannot be played The title of the MP3 audio album or75US A 5-characterservice number isAdditional Information The angles cannot be changedSelf-diagnosisFunction When letters/numbers appear in the displayGlossary 76USDolby Pro Logic 77USMovie mode Music modePlayback Control PBC 78USProgressive format Region CodeAUDIO POWER SPECIFICATIONS Specifications79US Amplifier sectionFM tuner section 80USAM tuner section Video section81US Language Code ListAdditional Information Code LanguageLANGUAGE SETUP DVD Setup Menu ListCUSTOM SETUP SCREEN SETUP83US IndexNumerics