Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 millwatts torated output.
Amplifier section
Stereo mode | 100 W + 100 W (6 ohms, 20 – 20,000 Hz, THD 0.7 %) |
Surround mode | Front: 100 W + 100 W |
| Center*: 100 W |
| Rear*: 100 W + 100 W (6 ohms, 20 – 20,000 Hz, THD 0.7 %) |
*Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog) | ANALOG IN: |
| Sensitivity: 150 mV |
| Impedance: 50 kilohms |
Inputs (Digital) | DIGITAL IN OPTICAL: |
| Sensitivity: – |
| DIGITAL IN COAXIAL: |
| Sensitivity: 0.5 V |
| Impedance: 75 ohms |
Outputs (Analog) | ANALOG OUT: |
| Voltage: 2 V |
| Impedance: 1 kilohms |
| SUBWOOFER ANALOG OUT: |
| Voltage: 3 V |
| Impedance: 47 kilohms |
| PHONES: |
| Accepts low- and |
Outputs (Digital) | DIGITAL OUT OPTICAL |
| Sensitivity: – |
Super Audio CD/DVD system
Laser | Semiconductor laser |
| (Super Audio CD/DVD: λ = 650 nm) |
| (CD: λ = 780 nm) |
| Emission duration: continuous |
Signal format system | NTSC |
Frequency response (at 2 CH STEREO mode) | |
| DVD (PCM): 2 Hz to 22 kHz (±1.0 dB) |
| CD: 2 Hz to 20 kHz (±1.0 dB) |
More than 80 dB (VIDEO 1 (AUDIO) connectors only) | |
Harmonic distortion | Less than 0.03 % |
Additional Information
continued