5Press ENTER.
The station is stored.
v
TUNEDST
FM
MHz
6Repeat 1 to 5 to store other stations.
To tune in a station with a weak signal
Press m or M repeatedly in 2 to tune in the station manually.
To change the preset number
Start over from 1.
To change the AM tuning interval
The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off the receiver by pressing [/1 on the remote. While holding down x (on the receiver), turn on the power using the remote. When you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.