Recommended Disc Types, Network Drive

◆ Network Drive

1Copy the network drive contents to the hard disc and then from the hard disk to the COMBO drive.

◆CD-ROM Drive

1 Clean the source CD, if necessary.

2 Create an image file and then copy the image file to the COMBO drive.

3 Check the CD-ROM drive record speed.

There are two recording methods :

●Low-speed (file by file)

●High-speed (transfer of an image file from the hard disc)

4 If the transfer speed of the CD-ROM drive is slower than the record speed, reduce the record speed.

◆ Others

1Before starting to record, determine the audio and transfer speeds by using the [Tool/System Test] option in Easy CD Creator. Then, choose an appropriate record speed. If the audio speed is less than 2X, first create an image file on the hard disc.

2To perform a record test before copying to a CD, select the [Test/Copy] option.

3If the test fails, try recording on another disc.

4The COMBO drive does not support high-speed recording to CD-RW discs above 8X. Discs above CD-RW 8X use different rewriting methods and can only be read via the COMBO drive.

Recommended Disc Types

CD-R	Fujifilm, Kodak, Maxell, Mitsubishi, Mitsui, Pioneer, Ricoh,
	SKC, Sony, Taiyo Yuden, TDK, Yamaha

CD-RW	Mitsubishi, Ricoh, SKC

DVD Region Protection Coding (RPC):

The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motion picture industry has divided the world into different regions or zones that correspond to the regional markets into which the motion picture industry releases movies. Simply put, RPC codes are placed on movies marketed throughout the world, based on the region of the world in which they are being sold. These RPC codes help control and prevent pirating of new movies into other motion picture regions prior to their true release dates within those markets.

The SM-308 COMBO drive supports RPC phase II. In the RPC-2 mode, the local code can be changed by users. RPC-2 is selected by default for the SM-308 COMBO drive. You can change the region code up to five times via an MPEG application.

Please contact your dealer or local SAMSUNG representative if you wish to change the local code more than five times.