To Watch TV & VCR Playback (or Other Equipment)
Watching TV
First check that the Tuner Mode is matched with the ANT input. (TV:AIR or CATV:CABLE) (See page 34)
Then, turn on the power of the
Select a TV channel you desire to watch with the NUMBER but-
1 tons on the remote control.
- If you select 125CH; Press .
You can also select a TV channel with the CHANNEL
2 UP/DOWN buttons. For this operation, you need to make settings as below.
- Select the TV(AIR) Signal or CATV Signal in the Tuner Mode of General Options, then use the Auto Scan to select channels automatically. Then, use Add/Delete Channel Mode to delete unnecessary channels. (see page 33)
Viewing VCR Playback
First check that the external input 1 or 2 on the back of
While in stop mode, select L1, L2 or L3 with the RETURN/INPUT
1 or CHANNEL UP/DOWN buttons on the remote.
(If the VCR is connected to terminal 1 of
2 Press the PLAY button of VCR.
30