Samsung DVD-R2000 manual If You Want to Record a TV Program or Line Input Signal

If You Want to Record a TV Program or Line Input Signal

You can use a DVD-RAM disc to record any program or a component connected to a line input. First have a recordable RAM disc prepared.

Release the write protect of the RAM disc.

(The record protector is located at the left bottom of RAM disc cartridge.)

1	Put the RAM disc into the TRAY.
	- If the RAM disc is not formatted yet, press the ENTER button by selecting Format

Disc on the General Options in the setup menu. Disc is formatted. (See page 36.)

	To record a TV program: Select a broadcast channel with
2 the CH UP/DOWN button or NUMBER buttons.
	To record a line input signal: Select the LINE (L1, L2, L3)
	that is connected to the external component with the
	RETURN/INPUT or CHANNEL UP/DOWN buttons.
3	Press the MODE button to change the record mode.
	- RECORD MODE:

FP : High quality record mode. You can record for one hour on a 4.7GB DISC.

SP : Standard record mode. You can record for two hours on a 4.7GB DISC.

LP : Long time record mode. You can record for four hours on a 4.7GB DISC is available.

Press the RECORD button on the remote control to start record-

4 ing. The REC indicator will light.

NOTE

•Without changing modes, the default for this DVD-R2000 is SP mode.

•During recording, the record mode cannot be changed.

•The recording time must be more than two seconds.

•You can record up to 99 titles.

•If you want to stop recording

- Press the Stop button on the remote control.

•If power is gone off during recording, all the contents recorded till then may be lost.

31