Samsung DVD-HD1000 manual Setting Up Display Options

Setting Up Display Options

You can set options depending on your type of TV and DVD screen.

In the stop mode, press the

SETUP button.

• The setup menu appears.

Use ▲▼ buttons to select the

Display menu and then press the

ENTER button.

Use ▲▼ buttons to select the option you want to set.

Use ▲ ▲buttons to select the value you want.

35

Display Options	How to setup
	Depending on the type of television you
	have, you may want to adjust the screen
TV Aspect	setting (aspect ratio)
	• Letter Box : You can see the total 16:9 ratio screen DVD,
	but black bars will appear at the top and
	bottom of the screen.
	• Pan-Scan: You can see the central portion of the 16:9
	screen. Extreme left and right side of movie
	picture will be cut off.
	• Wide : Select this if you are connecting the DVD player
	to a wide screen TV. However, DVDs recorded
	with 4:3 ratio cannot be viewed as the full 16:9
	picture even if you setup as shown above.
Still Mode	You can select how you want to
	compose the screen during a pause,
	step motion, or search.	Basic
	• If you select FIELD, the screen will not shake, but
Screen Messages	picture quality will slightly degrade.
	• If you select FRAME, the screen will shake, but	Operations
	picture quality remains the same.
	Display messages about the operation
	status.
Front Display	You can adjust the brightness of the
	unit's front panel display.
	If you select AUTO, the display is
	dimmed during playback, but gets
	brighter in the stop mode.
	Brightness changes in the order:
	AUTO DIM➝ DIM➝ BRIGHT.
Black Level	Select On if want to increase the
	brightness of the screen.
	You are unable to adjust picture
	brightness in case you select
	progressive video out.
		36