Samsung DVD-V6400, DVD-V6000, DVD-V5450 Progressive Scan, Component Video OUT jacks on the rear

Démarrer

Connecting DVD-VCR to the		❚ Progressive Scan
TV using the Component		the P.SCAN button on the front panel in stop mode.
Video Cable (DVD Only)		If the TV connected supports Progressive Scan, press
		for DVD. Activate it in DVD Stop mode.
		• The Progressive Scan feature is only available
		• The message “Press OK to confirm Progressive
Your TV must support progressive scan input to allow		scan mode. Otherwise press RETURN.” will be
you to watch component video output.		displayed. If you want Progressive scan mode,
You will enjoy high quality accurate colour reproduction		select OK. Make sure that the disc has stopped
images. Component video seperates the picture		completely before changing the mode.
element into black and white(Y), blue(Pb), red(Pr)
signals to present most clear and clean images.
1	Connect Component video cables between the
	COMPONENT VIDEO OUT jacks on the rear of
	the DVD-VCR and COMPONENT VIDEO IN jacks
	on the rear of the TV.
	Connect audio cables between the AUDIO LINE	• To cancel the progressive scan mode, press the
2 OUT jacks on the rear of the DVD-VCR and
		P.SCAN button in stop mode.
	AUDIO IN jacks on the rear of the TV.
		• Make sure that the colour coded connections match.
	• Take care to respect the colour coding of the left
		That is, the Y, Pb and Pr component output jacks of
	and right channels.
		your DVD -VCR should be connected to the exact
		corresponding component input jacks on your TV.
		Otherwise, red or blue images will be displayed on
		the TV screen.
	COMPONENT VIDEO OUT
			If your TV does not have Progressive scan
		Note	mode, there will be no signal on the screen.
			If you press the P.SCAN button, it will be
	COMPONENT VIDEO OUT
			changed to Interlace scan mode.
	1		See your TV User’s Manual to find out if
			your TV supports Progressive Scan.
			If Progressive Scan is supported, follow the
			TV User’s instructions regarding
			Progressive Scan settings in the TV’s menu
			system.
	2		Depending on your TV, the method of
			connection may differ from the illustration
			above.
			What is "Progressive Scan"?
			Progressive scan has twice as many
	COMPONENT INPUT		scanning lines as the interlace output
			method has. Progressive scanning method
			can provide better and clearer picture
			quality.
			You must connect the player to the
			component(s) before using the Progressive
			Scan feature.
			Use the Component Video connection
	COMPONENT VIDEO IN		method only for the DVD.
			NTSC DVD disk is not supported.

14 - English