Samsung DVD-V5450, DVD-V6000 Repeat Play Selecting Recording Speed, Press the OK or √ button

Repeat Play	Selecting the
	Recording Speed

You can set repeat play to repeat the tape continuously from beginning to end.

1 Press the MENU button, then press the … or † button to select VCR.

		VCR Setup
SETUP	Tape Select	: E180	√
DVD	Repeat Play	: Off	√

VCR

PROG

FUNC

			OK	RETURN	MENU
unctionsF	2	Press the OK or √ button.			: E180	√
		SETUP	Tape Select
		The Tape Select is highlighted.
VCR					VCR Setup
		DVD	Repeat Play		: Off	√
		VCR
		PROG

FUNC

OK RETURN MENU

3	Press the … or † button to select Repeat Play.
	Press the OK or √ button to select On or Off.

		VCR Setup
SETUP	Tape Select	: E180	√
DVD	Repeat Play	: Off	√

VCR

PROG

FUNC

OK RETURN MENU

•On : Repeat play.

•Off : Do not wish to repeat play.

You can record a cassette at two different speeds:

•SP (Standard Play)

•LP (Long Play)

In Long Play modes:

•Each cassette lasts twice as long

•The recording is of a slightly lower quality

1	Press the SPEED button to select SP or LP.
	• The selected record speed will appear on the

front panel display.

Type	Recording Time (in SP)
E180	180 mins. or 3 hours
E240	240 mins. or 4 hours
E260	260 mins. or 4 hours and 20 mins.
E300	300 mins. or 5 hours

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1 If you wish to protect a cassette, break off the tab using a small screwdriver.

2 To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

28 - English