Samsung DVD-V6400, DVD-V6000, DVD-V5450 Using the Tape Counter, Sequence, Œœ or √√ button

Using the Tape Counter

The tape counter:

•Indicates the elapsed time in the play and record modes (hours, minutes and seconds)

•Is reset when a cassette is inserted in the DVD-VCR

•Allows you to find the beginning of a sequence easily

•If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1	Insert a cassette in your DVD-VCR.
	To set the tape counter to zero at the beginning of

a sequence:

0:00:00

•Press the INFO. button twice to display the counter

•Press the CLEAR button when you want to set the tape counter to zero

2 When you are ready,

•Start playback or Recording.

•Press the ■ button.

•To fast-froward or rewind to the sequence at which the counter was set to zero, press the

œœor √√ button.

•Some DVD-VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the Screen Messages mode; refer to page 27).

Press the INFO. button:

•Once to display the current function, programme number, recording speed, date, time and counter

•Twice to display the counter only

•Three times to display the time remaining on the cassette

•Four times to clear the display

Playing Back

English - 41