Searching for a Specific Sequence, End Search

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts.

The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows:

		➞
	Prev	Seq. being	Next
etc.	Seq.	played	Seq.	etc.
2	1	1		2

➢This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.

Go To [0:00:00] Stop

Use this feature when you want to search for the 0:00:00 counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00.

The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.

1After pressing the SEARCH, press the corresponding ,❷ buttons, until the Go To [0:00:00] option is selected.

2Press the OK or ❿.

End Search

Use this feature when you want to search for a blank position to record a program on a cassette.

The VCR will fast forward, searching for a blank position, and then automatically stop at that position.If the VCR reaches the end of the tape during end search, the tape will be ejected.

1After pressing the SEARCH, press the corresponding or ❷ buttons, until the End Search option is selected.

2Press the OK or ❿.

Intro Scan

1After pressing the SEARCH, press the corresponding ,❷ buttons, until the Intro Scan option is selected.

2Press the OK or ❿.

3Press the ➛➛ or ❿❿ buttons depending on the direction where your desired programme is located.

4When an Index mark is found the DVD-VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.

5If you want to watch the tape from a particular Index, simply press ❿II twice.

INTRO SCAN :

Index Skip Search

This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button.

1After pressing the SEARCH, press the corresponding ,❷ buttons, until the Intro Scan option is selected.

2Press the OK or ❿.

3Press the ➛➛ or ❿❿ buttons twice more.

This will take you directly to the start of the desired programme is located.

4These Index searches can be made forwards:

(press ❿❿) or backwards: (press ➛➛).

(➛➛ -20

●

+20 ❿❿✌

5To cancel an Index search simply press the ❿II or ■ button.

INDEX SEARCH : - 6

ENG-15