Samsung DVD-V642K, DVD-V645K instruction manual Setting Up the Display Options

Setting Up the Audio Options

Dynamic Compression

1.On : To select dynamic compression.

2.Off : To select the standard range.

PCM Down Sampling

1.On : Select this when the amplifier connected to the player is not 96KHz compatible.

In this case, the 96KHz signals will be down converted to 48KHZ.

2.Off : Select this when the amplifier connected to the player is 96KHz compatible.

In this case, all signals will be output without any changes.

➢• How to make the SETUP menu disappear or

return to menu screen during set up; Press RETURN or ➛ button.

•Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Setting Up the Display Options

1With the unit in Stop mode, press the MENU button.

3 Select Display Setup using ,❷ buttons, then press the OK or ❿ button.

4Use the ,❷ buttons to select the desired item. Then press the OK or ❿ button.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2.4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

Black Level

Adjusts the brightness of the screen.(On/Off)

NTSC Disc Output

“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “PAL60” as is.