Setting Up the Language Features
Using the Subtitle Language
1With the unit in Stop mode, press the MENU button.
2 Select DVD using button.
3 Select Language Setup using ,❷ buttons, then press the OK or ❿ button.
| Language Setup |
Disc Menu | : English |
Audio | : English |
Subtitle | : Automatic |
4 | Select Subtitle using ,❷ buttons, then press the |
| OK or ❿ button. |
5 | Use the ,❷ buttons to select English. |
| - Select “Automatic” if you want the subtitle |
language to be the same as the language selected as the audio preference.
Subtitle Language
Automatic
Subtitle
-Select “Others” if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting.
6Press the OK button.
-English is selected and the screen returns to Language Setup menu.
Setting Up the Audio Options
1With the unit in Stop mode, press the MENU button.
2 Select DVD using button.
Setup
Setup
Display Setup
Setup :
3 | Select Audio Setup using ,❷ buttons, then | ||
| press the OK or ❿ button. | ||
4 | Use the ,❷ buttons to select the desired item. | ||
| Then press the OK or ❿ button. | ||
|
|
|
|
|
|
|
|
Dolby Digital Out
DTS
PCM Down Sampling
Dolby Digital Out
1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output.
➢Be sure to select the correct Digital Output or no audio will be heard.
MPEG-2 Digital Out
1.PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2.Bitstream :Converts to
DTS
1.Off : Doesn’t output digital signal.
2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.