Special Playback Features | A/V Receiver Connections |
During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the ❿ll button.
1Still
Press the ❿ll button on the remote control during playback.
•The picture will still and the audio will mute.
•To resume playback, press the ❿ll button.
•If the player is left in Still mode for 5 minutes, it will stop automatically.
2Frame Advance (Step)
While in playback mode, press the F.ADV/STEP button on the remote control to advance one frame at a time.
•Audio is muted during Frame Advance mode.
•Press ❿ll to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip l➛➛ / ❿❿l buttons on the remote control or front panel to jump forward and backward through disc chapters/tracks.
•Skip Forward will jump to the next chapter/track.
•Skip Back will jump to the beginning of the current chapter/track.
•Press Skip Back again to jump to the beginning of the previous chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the ➛➛
/❿❿ buttons on the remote control or front panel to visually search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed. Press ❿ll button to resume normal speed.
4Slow Motion
During playback, press the ❿ll button to Still the image. Then use the Search ❿❿ to play in slow motion at variable speeds.
•Each press increases the slow motion speed playback to 1/8, 1/4 or 1/2 normal speed.
•Audio is muted during slow motion playback.
5Stop/Resume
•Press the Stop button once to stop playback.
To resume the DVD/CD from the point where the disc stopped, press the ❿ll button.
•Press the ■ button twice to completely stop playback. The next time you press ❿ll, the disc will start over from the beginning.
To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD- VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers.
Before You Begin...
•If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the
O R |
To Digital Audio Input of an A/V |
Receiver with a Dolby Digital Decoder |
O R |
To Digital Audio Input of an A/V |
Receiver with a Dolby Digital Decoder |
1Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from the Digital Audio Out jacks on the back panel of the
•Optical
•Coaxial
•Use whichever connection is available on your A/V Receiver.