Samsung DVD-V540, DVD-V340, DVD-V440 Plug & Auto Set up, Tuning Your Television for, ❷ buttons

Page 10

Plug & Auto Set up

Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use.

1Connect the coaxial cable as indicated on page 7. (Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2Plug the DVD-VCR into the mains.

Result: The Language Set menu is displayed.

3 Select the required language by pressing the	or
❷ buttons.

4Press OK to store the language selected. Result: A message appears.

5Press OK to start the auto scanning.

◆The number of stations automatically stored by theVCR depends on the number of stations that it has found.

Auto setup

Please wait

00 %

Clock Set

Time DateYear

12 : 00

1/JAN

2004 THU

➢Auto preset can be performed by pressing ■ on the VCR continuously for 5 seconds or more with no tape inserted.

Tuning Your Television for the

DVD-VCR

You must tune your television for the DVD-VCR only if you are not using a RCA cable

➢To view pictures from your DVD-VCR when a RCA cable is used, the television must be set to the audio/video mode (AV).

1Switch on the television.

2Switch on the DVD-VCR by pressing STANDBY/ON on the front of the DVD-VCR or STANDBY/ON on the remote control.

3Select a programme position on the television to be reserved for use with your DVD-VCR.

4Insert the video cassette in the DVD-VCR. Check that the DVD-VCR starts reading the cassette; if not, press ❿II button.

5Start a scan on your television or set the television to UHF channel 36.

6Fine tune the television until the pictures and sound are obtained clearly.

7If you cannot find the pictures and sound, or there is interference from nearby channels, it may be necessary to change the setting of the DVD-VCR output channel (see Setting the DVD-VCR Output Channel on page 14 and Problems and Solutions on page 44).

8When the picture and sound are perfectly clear, store this channel at the desired programme position on the television.

Result: That programme is now reserved for use with your DVD-VCR.

ENG-9

Image 10

Contents DVD-V540 DVD-V440 DVD-V340 Remote Control Overview DVD-V540DVD-V440/V340 Contents Safety Instructions Following illustrations represent precautionsAudio Disc Type and CharacteristicsCharacteristics VideoFront View of the DVD-VCR DVD-V540Accessories Rear View of the DVD-VCRInserting Batteries in the Remote Control Display IndicatorsDVD Deck is active DVD, CD, VCD, or Svcd is loaded Connecting DVD-VCR to the TV using the RCA Cable Connect the coaxial cable as indicated onTuning Your Television for Plug & Auto Set up❷ buttons Deck Control Keys Press the corresponding Setting the Date and TimeYour DVD-VCR contains a 24-hour clock and calendar used to Clock optionPresetting the Stations Automatically Install option11 To...Then Presetting the Stations ManuallyInstall option If you ThenPress the Clear button Clearing a Preset StationChanging the Preset Station Table Same time on the television screenSetting the DVD-VCR Output Channel Selecting the RF OUT Sound Mode B/G-D/KCH21 .. CH36 .. CH69 Please refer to Selecting the Colour ModeOK or ❿, until Screen Messages Auto Power offIntelligent Picture Control On completion, press the Return buttonRepeat Play Long play mode LP is displayedSelecting the Cassette Type VHS PlayProtecting a Recorded Cassette Recording a Programme ImmediatelyRecording a Programme with Automatic Stop You can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording Result The Timer Programming menu is displayedSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence Frame by Frame Playing a Cassette in Slow MotionPlaying a Sequence at Variable Speeds Searching for a Specific SequenceEnd Search Using the Tape CounterGo To 00000 Stop Intro ScanYou wish to play back and/or copy Using the Assemble Edit FunctionHelp of a second VCR Pictures taken with a camcorderBrand Codes Brand Codes Using the TV Buttons on Remote Control DVD-V540 OnlyRecording from Another VCR or Camcorder Button FunctionChoosing a Connection FeaturesDigital Audio out Jack Press the ,❷ buttons to select English Setting Up the Language FeaturesOK or ❿button RecordedMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionTV Aspect Setting Up the Display OptionsAdjusts the brightness of the screen.On/Off Black LevelThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password About the Rating LevelReceiver Connections Before You BeginWhat is Progressive Scan? Component Connections for DVD DVD-V540/DVD-V440If you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVWhen Playing a DVD/VCD/CD Using the Display FunctionTo make the screen disappear, press the INFO. button again Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle LanguagePress OK When playing a DVDUsing the Audio button Use the , ❿ buttons to select Stereo, or ❿ On VCD/CDRecalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Clearing a MarkProgram/Random playback CD-R MP3/WMA discsRandom Play CD/MP3/WMA Program Play & Random PlayProgram Play CD/MP3/WMA Return to the Album ScreenPicture CD Playback CD-R Jpeg DiscsDivX/XviD/MPEG4 Special Playback Features DVD-V540/DVD-V440 ZoomMPEG4 Supported DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback DVD-V540/DVD-V440 MPEGs containing DivX can be divided into Video and AudioInput Technical SpecificationsGeneral OutputProblems and Solutions VCR Problem Explanation/SolutionBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action This Appliance is Distributed by Electronics