Samsung DVD-V440, DVD-V340 Recording from Another VCR or Camcorder, Brand Codes Brand Codes

Page 26

Recording from Another VCR or Camcorder

You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the DVD-VCR, from which the cassette is to be copied, to the appropriate RCA audio and video input connectors on the rear of your DVD- VCR, as indicated on page 8.

2Insert a blank cassette in your DVD-VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT SEL. button to select the appropriate input on your DVD-VCR: LINE IN for the RCA input.

5Start playing back the cassette to be copied.

6Hold REC (●) down for a while to start recording on your DVD-VCR.

7When you have finished recording, press ■ on both VCR and DVD-VCR.

➢If you wish to view the cassette being copied:

◆Your DVD-VCR must be connected as usual to the television (see page 7~8 for further details)

Using the TV Buttons on the

Remote Control ★ (DVD-V540 Only)

Your DVD-VCR remote control will work with Samsung televisions and compatible brands.

To determine whether your television is compatible, follow the instructions below.

1Switch your television on.

2Point the remote control towards the television.

3Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.

Brand Codes Brand Codes

SAMSUNG

01 to 06

PHILIPS

02,

20, 22

AKAI

09,

23

SABA

13, 14, 22 to 24

GRUNDIG

09, 17, 21

SONY

15,

16

LOEWE

02

 

THOMSON13,

14, 24

PANASONIC 08,

23 to 27

TOSHIBA

07, 16 to 19, 21

 

 

 

 

 

 

Result: If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.

‚➢ If several codes are indicated for your television brand, try each one in turn until you find one that works.

☛When you change the batteries in the remote control, you must reprogramme the code, following the same procedure.

You can then control the television using the following buttons.

Button

Function

STANDBY/ON

Used to switch the television and

 

DVD-VCR on and off.

TV or VCR

Used to switch between the TV and

 

VCR modes.

 

 

INPUT SEL.

Used to select an external source.

 

 

VOL + or –

Used to adjust the volume of the

 

television.

 

 

PROG/TRK

Used to select the required

( or )

programme.

 

 

TV MUTE

Used to mute the volume of the

 

television.

➢The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.

ENG-25

Page 25 Page 27
Image 26
Page 25 Page 27
Contents DVD-V540 DVD-V440 DVD-V340 Remote Control Overview DVD-V540DVD-V440/V340 Contents Safety Instructions Following illustrations represent precautionsAudio Disc Type and CharacteristicsCharacteristics VideoFront View of the DVD-VCR DVD-V540Accessories Rear View of the DVD-VCRDVD Deck is active DVD, CD, VCD, or Svcd is loaded Display IndicatorsInserting Batteries in the Remote Control Connecting DVD-VCR to the TV using the RCA Cable Connect the coaxial cable as indicated on❷ buttons Plug & Auto Set upTuning Your Television for Deck Control Keys Press the corresponding Setting the Date and TimeYour DVD-VCR contains a 24-hour clock and calendar used to Clock optionPresetting the Stations Automatically Install option11 To...Then Presetting the Stations ManuallyInstall option If you ThenPress the Clear button Clearing a Preset StationChanging the Preset Station Table Same time on the television screenCH21 .. CH36 .. CH69 Selecting the RF OUT Sound Mode B/G-D/KSetting the DVD-VCR Output Channel OK or ❿, until Selecting the Colour ModePlease refer to Screen Messages Auto Power offIntelligent Picture Control On completion, press the Return buttonRepeat Play Long play mode LP is displayedSelecting the Cassette Type VHS PlayRecording a Programme with Automatic Stop Recording a Programme ImmediatelyProtecting a Recorded Cassette You can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording Result The Timer Programming menu is displayedSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence Frame by Frame Playing a Cassette in Slow MotionPlaying a Sequence at Variable Speeds Searching for a Specific SequenceEnd Search Using the Tape CounterGo To 00000 Stop Intro ScanYou wish to play back and/or copy Using the Assemble Edit FunctionHelp of a second VCR Pictures taken with a camcorderBrand Codes Brand Codes Using the TV Buttons on Remote Control DVD-V540 OnlyRecording from Another VCR or Camcorder Button FunctionDigital Audio out Jack FeaturesChoosing a Connection Press the ,❷ buttons to select English Setting Up the Language FeaturesOK or ❿button RecordedMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionTV Aspect Setting Up the Display OptionsAdjusts the brightness of the screen.On/Off Black LevelThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password About the Rating LevelReceiver Connections Before You BeginWhat is Progressive Scan? Component Connections for DVD DVD-V540/DVD-V440If you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVTo make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/VCD/CD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle LanguagePress OK When playing a DVDUsing the Audio button Use the , ❿ buttons to select Stereo, or ❿ On VCD/CDRecalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Clearing a MarkProgram/Random playback CD-R MP3/WMA discsRandom Play CD/MP3/WMA Program Play & Random PlayProgram Play CD/MP3/WMA Return to the Album ScreenPicture CD Playback CD-R Jpeg DiscsDivX/XviD/MPEG4 Special Playback Features DVD-V540/DVD-V440 ZoomMPEG4 Supported DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback DVD-V540/DVD-V440 MPEGs containing DivX can be divided into Video and AudioInput Technical SpecificationsGeneral OutputProblems and Solutions VCR Problem Explanation/SolutionProblem Action Troubleshooting Guide DVDBefore requesting service troubleshooting This Appliance is Distributed by Electronics
Top Page Image Contents