Searching for a Specific
Sequence
Go To [0:00:00] Stop
Use this feature when you want to search for the 0:00:00 counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.
1After pressing the SEARCH, press the corresponding ,❷ buttons, until the Go To [0:00:00] option is selected.
2Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to record a program on a cassette.
The VCR will fast forward, searching for a blank position, and then automatically stop at that position.If the VCR reaches the end of the tape during end search, the tape will be ejected.
Intro Scan
1After pressing the SEARCH, press the corresponding ,❷ buttons, until the Intro Scan option is selected.
2Press the OK or ❿.
3Press the ➛➛ or ❿❿ buttons depending on the direction where your desired programme is located.
4When an Index mark is found the
5If you want to watch the tape from a particular Index, simply press ❿II twice.
INTRO SCAN :
Index Skip Search
This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button.
1After pressing the SEARCH, press the corresponding ,❷ buttons, until the Intro Scan option is selected.
2Press the OK or ❿.
3Press the ➛➛ or ❿❿ buttons twice more.
This will take you directly to the start of the desired programme is located.
4These Index searches can be made forwards: (press ❿❿) or backwards: (press ➛➛).
(➛➛ | ● | ● | 0 | ● | ● | +20 ❿❿✌ |
5To cancel an Index search simply press the ❿II or ■ button.
INDEX SEARCH : 
- 6
Using the Tape Counter
The tape counter:
◆Indicates the elapsed time in the play and record modes (hours, minutes and seconds)
◆Is reset when a cassette is inserted in the
◆Allows you to find the beginning of a sequence easily
☛If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
1Insert a cassette in your
2To set the tape counter to zero at the beginning of a sequence:
◆Press INFO. twice to display the counter
◆Press CLEAR when you want to set the tape counter to zero.