Samsung DVD-V440 Presetting the Stations Manually, Install option, 11 To...Then, If you Then

Page 14

Presetting the Stations Manually

☛You do not need to preset the stations manually if you have already set them automatically.

1After pressing the MENU, press the OK or ❿. Result: The Setup menu is displayed.

2 Press the corresponding	,❷buttons to select the
Install option.

3Press the OK or ❿ to select this option. Result: The Install menu is displayed.

Install

Auto Setup

Manual Setup

TV System	: G
VCR Output CH	: CH 36

4 Press the corresponding ,❷ buttons, until the Manual Setup option is selected.

5Press the OK or ❿ to select a Manual Setup option. Result: The TV STATION TABLE menu is displayed.

TV STATION TABLE

PRCHNAME

1

2

3

4

5

SWAPPING : OK

DELETE : CLEARRETURN

6Press the ,❷ buttons to select a programme number as required.

7Press the ❿ button to preset the station.

Result: The MANUAL TUNING menu is displayed.

MANUAL TUNING

PR	:	1
CH	:	- -
MFT	:	-

NAME	: - - - -
	MEMORY : OK
	RETURN

8Press the ➛ or ❿ buttons to start scanning the channels.

Result: The frequency band is scanned and the first station found is displayed.

9Press the ,❷ buttons until the NAME is selected. The station name is set automatically from the broadcast signal.

10To change the programme’s name, press the ❿ button. Result: The first letter of the name flashes.

11To...Then...

	Select a character	Press the ,❷ button until the
	in the name	required character is displayed
		(letters, numbers or “-” character).

	Move to the next or Press the ➛ or ❿ buttons
	previous character	respectively.


12 If you...		Then...

	Wish to store the	◆ Press the	,❷ buttons
	station displayed	until the MFT is selected.
		◆ Press the ➛ , ❿ buttons to
		adjust the picture, if necessary.
		◆ Press OK to store the station

	Do not wish to	◆ Press the	,❷ buttons
	store the station	until the CH is selected.
	displayed	◆ Press the ➛ , ❿ buttons to

go on scanning the frequency band and display the next station

◆ Go back to the beginning of Step 14

13Repeat this procedure from Step 6 onwards, until all the required stations have been stored.

14On completion, press the RETURN button three times to exit the menu.

ENG-13

Image 14

Contents DVD-V540 DVD-V440 DVD-V340 Remote Control Overview DVD-V540DVD-V440/V340 Contents Safety Instructions Following illustrations represent precautionsAudio Disc Type and CharacteristicsCharacteristics VideoFront View of the DVD-VCR DVD-V540Accessories Rear View of the DVD-VCRDVD Deck is active DVD, CD, VCD, or Svcd is loaded Display IndicatorsInserting Batteries in the Remote Control Connecting DVD-VCR to the TV using the RCA Cable Connect the coaxial cable as indicated on❷ buttons Plug & Auto Set upTuning Your Television for Deck Control Keys Press the corresponding Setting the Date and TimeYour DVD-VCR contains a 24-hour clock and calendar used to Clock optionPresetting the Stations Automatically Install option11 To...Then Presetting the Stations ManuallyInstall option If you ThenPress the Clear button Clearing a Preset StationChanging the Preset Station Table Same time on the television screenCH21 .. CH36 .. CH69 Selecting the RF OUT Sound Mode B/G-D/KSetting the DVD-VCR Output Channel OK or ❿, until Selecting the Colour ModePlease refer to Screen Messages Auto Power offIntelligent Picture Control On completion, press the Return buttonRepeat Play Long play mode LP is displayedSelecting the Cassette Type VHS PlayRecording a Programme with Automatic Stop Recording a Programme ImmediatelyProtecting a Recorded Cassette You can check your preset recordings Using the Timer Programming FeatureChecking a Preset Recording Result The Timer Programming menu is displayedSelecting the Audio Output Mode Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassettePlaying a Sequence Frame by Frame Playing a Cassette in Slow MotionPlaying a Sequence at Variable Speeds Searching for a Specific SequenceEnd Search Using the Tape CounterGo To 00000 Stop Intro ScanYou wish to play back and/or copy Using the Assemble Edit FunctionHelp of a second VCR Pictures taken with a camcorderBrand Codes Brand Codes Using the TV Buttons on Remote Control DVD-V540 OnlyRecording from Another VCR or Camcorder Button FunctionDigital Audio out Jack FeaturesChoosing a Connection Press the ,❷ buttons to select English Setting Up the Language FeaturesOK or ❿button RecordedMPEG-2 Digital Out Setting Up the Audio OptionsDolby Digital Out Dynamic CompressionTV Aspect Setting Up the Display OptionsAdjusts the brightness of the screen.On/Off Black LevelThere are up to 8 rating levels on a disc Setting Up the Parental ControlAbout the Change Password About the Rating LevelReceiver Connections Before You BeginWhat is Progressive Scan? Component Connections for DVD DVD-V540/DVD-V440If you are using a 169 TV Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 43 TVTo make the screen disappear, press the INFO. button again Using the Display FunctionWhen Playing a DVD/VCD/CD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle LanguagePress OK When playing a DVDUsing the Audio button Use the , ❿ buttons to select Stereo, or ❿ On VCD/CDRecalling a Marked Scene Using the Mark Function MP3/WMA PlayUsing the Mark Function DVD/VCD Clearing a MarkProgram/Random playback CD-R MP3/WMA discsRandom Play CD/MP3/WMA Program Play & Random PlayProgram Play CD/MP3/WMA Return to the Album ScreenPicture CD Playback CD-R Jpeg DiscsDivX/XviD/MPEG4 Special Playback Features DVD-V540/DVD-V440 ZoomMPEG4 Supported DivX/XviD/MPEG4 Feature TableDivX/XviD/MPEG4 Playback DVD-V540/DVD-V440 MPEGs containing DivX can be divided into Video and AudioInput Technical SpecificationsGeneral OutputProblems and Solutions VCR Problem Explanation/SolutionProblem Action Troubleshooting Guide DVDBefore requesting service troubleshooting This Appliance is Distributed by Electronics