Samsung DVD-V6700 instruction manual Connecting to a TV S-Video, ENG-16

C O N N E C T I O N S

Connecting to a TV (S-Video)

-Connecting to your TV using an S-Video cable.

-You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through audio out(red and white) or line out(red and white) jacks).

1

Using an S-Video cable (not included), connect the S-VIDEO OUT jack on the rear of the DVD- VCR to the S-VIDEO IN jack of your TV.

2

Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) jacks on the rear of the DVD-VCR to the AUDIO (red and white) IN jacks of your TV.

Turn on the DVD-VCR and TV.

3

With the unit in Stop mode, set the Alt video output to S-Videoin the Display Setup menu (see pages 55 ~ 56) or press the PROGRESSIVE button on the remote control until S-Video is output.

White	Red
S-Video Cable
(not included)	Audio Cable
Red	White

4

Press the input selector on your TV remote control until the S-Video signal from the DVD- VCR appears on your TV screen.

Notes

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19)

-The number and position of the jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

-The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) jack connected.

-You can hear sound from the LINE OUT AUDIO (red and white) or AUDIO OUT (red and white) jacks for S- Video connection. VCR audio only outputs through the Line Out Audio jacks (red and white).

-Please do not connect S-Video and Component Video (Y, Pb, Pr) outputs simultaneously, as they may interfere and degrade both video output quality.

ENG-16